Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TPGMC Extension failure

Created by: Naf1z at: 8/5/2019 11:00 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/5/2019 11:00 PM	Rate (0)
Naf1z Bronze Member Joined: 2/5/2015 Last visit: 10/14/2024 Posts: 25 Rating: (0)	Hi! I am having problem with downloading a project to Sinamics drive. When I open the project, I am always getting the warning that technology extension "TPGMC_Sinamics_5_1" is missing. Even though, I install the said technology extension, I am still getting the same warning.(See the attachment). I am using the Starter V5.1.1.2. Does anybody has any idea, how to get rid of this or solve this. Thanks in advance. -Nafiz Attachment Sinamics_fail.PNG (558 Downloads)

Suggestion To thank Quote Answer

8/7/2019 11:08 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 10/30/2024 Posts: 5931 Rating: (813)	Hello, please contact us via Email and we will send you the libraries. Please check you personal messages. Update: you can now download previous versions directly: https://support.industry.siemens.com/cs/ww/en/view/72839973 Thank you!
	Last edited by: Technology Team at: 07/11/2022 10:00:11 With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

5/14/2024 3:15 PM	Rate (0)
SillyPutty47 Member Joined: 8/10/2016 Last visit: 10/1/2024 Posts: 1 Rating: (0)	Hello, I am having the same problem as the user above. I have installed TPGMC v5.1 but still get the popup when opening Starter that I am missing the technology package. It works fine on Windows 7 but on Windows 10 I am unable to clear this missing technology package message. I have tried with Starter 5.3 and 5.4.
	Last edited by: SillyPutty47 at: 05/14/2024 15:15:47
Suggestion To thank Quote Answer

5/15/2024 12:59 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 10/30/2024 Posts: 5931 Rating: (813)	Hello, Before downloading the project, you have to download the library TPGMC_SINAMICS Below is a general description of how to download libraries. 4.2.11 Loading the DCC technology option onto the CF card of the drive device https://support.industry.siemens.com/cs/ww/en/view/109755516
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on