Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Unwind Application V60

Created by: Energiteam at: 3/20/2014 7:36 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

3/20/2014 7:36 AM	Rate (0)
Energiteam Posts: 6 Rating: (0)	Dear Experts, Presently I am working for paper cup cutting machine project. I planed the papaer unwind tension controlled to be achived using V60 servo drive. I have the ultrasonic sensor for measure the paper size. I am using 1214C PLC. Is it possible to achive the tension control using V60 servo drive. Pls guide me if anybody have experience in unwinding application. regards rsk
Energiteam Posts: 6 Rating: (0)	Last edited by: Energiteam at: 4/7/2014 1:30 PM
Suggestion To thank Quote Answer

3/21/2014 2:47 AM	Rate (0)
JWilson Experienced Member Joined: 9/16/2008 Last visit: 11/6/2024 Posts: 58 Rating: (3)	Call your local Siemens office There is a S71200/1500 converting library with winder blocks for diameter calculations etc I recommend you start with this library

Suggestion To thank Quote Answer

3/24/2014 7:38 AM	Rate (0)
Energiteam Posts: 6 Rating: (0)	Thank you for your sugesstion. I find out the winding application library manual for s7 1200 and s7 1500 converting blocks. Where can i find for Unwinding applications. http://support.automation.siemens.com/WW/view/en/58565043
Energiteam Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

3/25/2014 12:50 PM	Rate (0)
C00lb0! Advanced Member Joined: 10/15/2009 Last visit: 2/9/2021 Posts: 20 Rating: (0)	Dear friend, Please open Converting tool manual, in that page 122 will guide you to select what type of Winder application is required.

Suggestion To thank Quote Answer

3/25/2014 3:46 PM	Rate (0)
Energiteam Posts: 6 Rating: (0)	Thank you for your sugesstion. If the converting library will be available free of cost or chargable. please let me know. regards Rsk
Energiteam Posts: 6 Rating: (0)	Last edited by: Energiteam at: 4/7/2014 1:31 PM
Suggestion To thank Quote Answer

3/26/2014 2:13 PM	Rate (0)
JWilson Experienced Member Joined: 9/16/2008 Last visit: 11/6/2024 Posts: 58 Rating: (3)	No cost from your Siemens representative

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on