Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

FM 458-1 DP: 54 (User STOP triggered on this CPU)

Created by: miskopeter at: 2/27/2012 1:12 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

2/27/2012 1:12 PM	Rate (0)
miskopeter Posts: 8 Rating: (0)	Hello, I'm working with FM 458 and sometimes i get this fault on FM by running system: Informations in the exception buffer Informations concerning the last crash: Time of day: 26.11.11 19:55:27.5433 h ID: #4 USER Supplementary ID: 54 (User STOP triggered on this CPU) I can not find this fault code in help. Have you any idea? Pls Thanx
miskopeter Posts: 8 Rating: (0)	Last edited by: miskopeter at: 2/27/2012 1:36 PM
Suggestion To thank Quote Answer

2/27/2012 1:49 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 9/15/2025 Posts: 2218 Rating: (282)	Hello. This is generally not a fault. This is message about that the execution of program was stopped by the user at mentioned date/time. This may be done using CFC command 'CPU-Operating mode-Stop', or may be in Simatic Manager 'PLC-Module Information' (if I remember correctly).

Suggestion To thank Quote Answer

2/27/2012 2:52 PM	Rate (0)
miskopeter Posts: 8 Rating: (0)	Hello i had the same opinion but line is normally working and this fault i will get after few hours - nobody is touching the system
miskopeter Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/27/2012 5:57 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 9/15/2025 Posts: 2218 Rating: (282)	How often do you see this 'fault'? Every day, every few hours? What is on the first tab of 'Module Information'? Are you sure that nobody touch the FM458?

Suggestion To thank Quote Answer

2/28/2012 7:27 AM	Rate (0)
miskopeter Posts: 8 Rating: (0)	Last 3 days two times. On first tab are no errors. Display of the system error panels SYS_ERR and INIT_ERR: Initial error: 0x0000 -> no initial error registered Initialization error: 0x0000 PN-Init. and PN-IB error: 0x0000 Coordination error during Init.: 0x0000 Missing reply from the C bus: 0x0000 Missing reply from the L bus: 0x0000 Error during $ signal init.: 0x0000 Task manager error T1: 0x00 Task manager error T2: 0x00 Task manager error T3: 0x00 Task manager error T4: 0x00 Task manager error T5: 0x00 Aufgabenverwalter-Fehler I1: 0x00 Aufgabenverwalter-Fehler I2: 0x00 Aufgabenverwalter-Fehler I3: 0x00 Aufgabenverwalter-Fehler I4: 0x00 Aufgabenverwalter-Fehler I5: 0x00 Aufgabenverwalter-Fehler I6: 0x00 Aufgabenverwalter-Fehler I7: 0x00 Aufgabenverwalter-Fehler I8: 0x00 HW monitoring error: 0x00000000 User error: 0x0000 Communication error: -> no error registered Hardware errors (INIT_ERR): -> no error registered ----------------------------- End of Diagnosis -------------------------------
miskopeter Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/28/2012 9:42 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 9/15/2025 Posts: 2218 Rating: (282)	Hello. When you have message in the exception buffer does your FM-program runs or not at this time? What do you see in 'Module Information' called from Simatic Manager? In Simatic Manager right-click on FM458 and select PLC-Module Information. Do you see here events with numbers AF06 or AF0C and after it AF03?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on