Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

LOGO_8 communication with expansion module DM8 24R

Created by: jura_v at: 2/11/2021 8:56 AM (3 Replies)

Rating (2)

Thanks 1

4 Entries

2/11/2021 8:56 AM	Rate (0)
jura_v Posts: 9 Rating: (0)	Hello, i have problem with comunication betwen LOGO_8 and expansion modules DM8 24R, first expansion model have communication with LOGO (GREEN light) other two doesn't have comunication (RED light). LOGO_8 + DM8_24R (GREEN light) + DM8_24R (RED light) + DM8_24R (RED light) See attached photo. Does anyone had similar situation and some advice how to solve it ? Attachment project.png (356 Downloads)
jura_v Posts: 9 Rating: (0)	Last edited by: jura_v at: 02/11/2021 08:59:02
Suggestion To thank Quote Answer

2/11/2021 9:01 AM	Rate (2)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating: (4496)	It may be that there is a contact problem with the slides of the expansion modules. I would move the slider back and forth several times, possibly using contact spray.

Suggestion To thank Quote Answer

2/11/2021 12:12 PM	Rate (0)
jura_v Posts: 9 Rating: (0)	Hi, it was problem with connector, now is fine. Thank you.
jura_v Posts: 9 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

2/11/2021 1:35 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35917 Rating: (4496)	Hello jura_v, that's sounds good ...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on