Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

logo display connector

Created by: Gareth_M at: 10/19/2005 12:40 PM (4 Replies)

Rating (4)

Thanks 0

5 Entries

10/19/2005 12:40 PM	Rate (0)
Gareth_M Posts: 9 Rating: (6)	I doubt if siemens would recommend this but has anyone done this ? I wanted to mount the LOGO! in a cabinet so that the display can be seen for error messages etc. it is difficult to do this as the buttons and eeprom are proud of the display. So i looked inside the LOGO! and the display is connected to the board with an FFC ribbon cable. If i used a FCC cable extender i could be able to mount the display where i like. At first glance the connector appears to be 20 pin with 1mm pitch but i will check in more detail later. I was just wondering if has already been attempted by someone. Any thoughts? Gareth
Gareth_M Posts: 9 Rating: (6)
Suggestion To thank Quote Answer

10/21/2005 2:36 PM	Rate (0)
_Marius_ Experienced Member Joined: 10/5/2005 Last visit: 8/6/2025 Posts: 63 Rating: (6)	Hi! Why you don't use the S7-221 with a TD100C display? It is cheap and robust.

Suggestion To thank Quote Answer

10/24/2005 12:48 PM	Rate (0)
Gareth_M Posts: 9 Rating: (6)	Well i could do that Mausus, but the reason that I use the LOGO! is that i am an electronics engineer who hasnt learned how to program yet. I find the LOGO comfortsoft function block method easy and intuitive. I really wouldnt know how to begin with a S7 . If i get time I will teach myself how to do it but Im no software expert so i am a little daunted by it if i am honest. Gareth
Gareth_M Posts: 9 Rating: (6)
Suggestion To thank Quote Answer

10/27/2005 5:35 PM	Rate (2)
Gareth_M Posts: 9 Rating: (6)	Oh well, i have decided to listen your advise Mausus, i will go for a S7-222 and i will get a td200.How much more difficult are these to programme?.I only have a very short time to learn as I need this to work fast. Am i right in thinking that I need the following. S7-221 TD200 Micro/Win Cable ....also i was told that the software for the HMI is not needed as its part of micro/win? anybody shed some light on that? God help me. Gareth
Gareth_M Posts: 9 Rating: (6)	Last edited by: Gareth_M at: 10/27/2005 5:35 PM
Suggestion To thank Quote Answer

10/28/2005 2:07 PM	Rate (2)
Ajay Regular Member Joined: 10/26/2005 Last visit: 8/19/2025 Posts: 2 Rating: (2)	Gareth, The TD200 configuration is contained within the S7 22x PLC. So you will not need another software package. MicroWin is sufficient. There are different versions of the TD200 you will need to make sure that the TD200 you opt for is supported by your MicroWin version. The latest version of MicroWin is v4.0+SP2. If you opt for the TD100 option then you can only configure this from MicroWin v4.0+SP2. If only a simple text display is required you may find the TD100 sufficient. Its main restriction is that it does not have a backlight for the display. Regards Ajay

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on