Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Micromaster 440 PV not Received in Reverse Direction

Created by: MNGRELECT at: 2/19/2020 7:52 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/19/2020 7:52 AM	Rate (0)
MNGRELECT Posts: 2 Rating: (0)	I have installed 7.5kW Micromaster 440 on forward reverse motor. it gives Process Value (4-20 mA) in forward running but doesn't give PV in reverse running on its terminal. PV shows on AOP though. Is this a parameter issue. do i need to enable something??
MNGRELECT Posts: 2 Rating: (0)	Last edited by: MNGRELECT at: 02/19/2020 08:00:01
Suggestion To thank Quote Answer

2/19/2020 9:18 AM	Rate (0)
petr_sipor Bronze Member Joined: 3/25/2008 Last visit: 9/10/2025 Posts: 224 Rating: (8)	Hi, USE THE ABSOLUTE VALUE FOR ANALOGUE OUTPUT

Suggestion To thank Quote Answer

10/17/2024 9:45 AM	Rate (0)
RokF Joined: 6/12/2024 Last visit: 8/28/2025 Posts: 1 Rating: (0)	Hello I have the same problem. In reverse i get no signal (0-10V) What do you mean by use absolute values ? Thank you

Suggestion To thank Quote Answer

10/18/2024 5:10 AM	Rate (0)
pankaj_054 Experienced Member Joined: 3/13/2019 Last visit: 4/27/2025 Posts: 196 Rating: (2)	Dear, Which terminal you are using for PV 0 to 20ma,??? What is your parameter settings in P0771,P0775,P0776..... Pls share Regards, Pankaj Tiwari
	“In the middle of difficulty lies opportunity.”
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on