Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Texts in the initialisation and termination in SFC-visualisation

Created by: Jaapie at: 12/7/2006 1:49 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

12/7/2006 1:49 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 5/20/2025 Posts: 800 Rating: (63)	Hi All, We made a SFC type in PCS7V6.0 in this type we used inputs and outputs with specific names like 'Motor_Stop' and 'Motor_Run'. We used these types in CFC and connected the outputs and inputs to differend blocks in CFC. When the operatoropendthe SFC-visualisation hecould read these texts. Now we upgraded to PCS7V6.1 (no SP1) and we discovered that the texts in the SFC-visualisation (also of the operator) are no longer 'Motor_Stop' or 'Motor_Run' but the name of the CFC connection is shown. Like; GH10203/RRMP/MOTORGH701.fIN. Is this changed?I hope this is some kind of setting because the operator doesnot untherstand these texts.[:cry:] Please help, my customer does not like this at all!! For now the only solution I can see is to use blocks and connections with a name that the operator can untherstand so these names are shown in SFC, but this will take a lot of time.[:(] Thanks in advance, Jaap
	Last edited by: Jaapie at: 12/7/2006 1:59 PM
Suggestion To thank Quote Answer

12/8/2006 3:20 PM	Rate (1)
ateam Bronze Member Joined: 12/8/2006 Last visit: 11/27/2023 Posts: 170 Rating: (26)	hallo jaapie, i had the same problem. Contact the hotline, then you will get a hotfix! After installing the hotfix, in SFV you will see both - the really name of the SFC-Parameter - the name of the connections in CFC I believe, your problem is fixed in PCS 7 V6.1+SP1 and HF4 for CFC (Hotfix for CFC not for SFC). goodby ateam

Suggestion To thank Quote Answer

12/8/2006 3:29 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 5/20/2025 Posts: 800 Rating: (63)	Hi A-Team, If this is true you made me very happy, and my customer!! Thanks and have a nice weekend Jaap

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on