Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA V11 Step 7 and WinCC Professional SP2 64-bit Support

Created by: Manie_Devco at: 1/11/2012 9:09 AM (3 Replies)

Rating (1)

Thanks 3

4 Entries

1/11/2012 9:09 AM	Rate (0)
Manie_Devco Posts: 26 Rating: (0)	As I understand as from SP2 64-bit windows is now supported. I need to install on a new machine. Packages ordered 01/12/2011. Received SP1 software. Downloaded SP2 for both packages. Now catch22..... How do I go about installing these packages on 64 Bit software?
Manie_Devco Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

1/11/2012 9:28 AM	Rate (1)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello, Did you ask about it in Siemens in order to receive a SP2 installation? Anyway there is possibility to install SP2 in 64bits...Send me a PM... Best regards, Hristo MIhalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Manie_Devco

1/11/2012 9:45 AM	Rate (0)
Manie_Devco Posts: 26 Rating: (0)	AFAIK SP2 was only released in December. Ordered as latest version for new installation. PM sent
Manie_Devco Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

1/11/2012 2:07 PM	Rate (0)
Manie_Devco Posts: 26 Rating: (0)	I am answering my own posts here, but hopefully this could help others. I contacted Siemens support again, and after some explaining in a "nice" way the answer was as follows: Installation on 64 bit is only possible with Trial disks. These are not available yet, but I can order them so long. Multi-user will only be available in V12/13/14 - not sure. Migration of old projects are not advised - there are some problems that will occur. Do not attempt a large scale project at this stage on V11. It will take too long, rather use WinCC V7.1 and Step7 V5.5, WinCC 2008. Thank you Siemens.
Manie_Devco Posts: 26 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users O_Moderator Tranhieu0983

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on