Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

want to normalize the s120 cu320-2pn module

Created by: stockerr at: 1/9/2025 10:33 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/9/2025 10:33 AM	Rate (0)
stockerr Joined: 2/3/2022 Last visit: 9/14/2025 Posts: 24 Rating: (0)	Dear experts I need your help during the test drive Please reply with any comments First of all, I was test driving the servo group of the existing operating system. I uploaded the servo group in advance, but it was not restored to the original state. I will tell you in advance, since it was a system that was already in operation, I think there is no problem with the configuration in terms of hardware. I would like to share the current problems with you along with the pictures below I can force the commissioning command from the PC, but there seems to be a problem with the communication from the PLC. The ping test result showed no problem with the ping. What parts should I check to ensure normal system operation?
	Last edited by: Moderator_Lan at: 01/09/2025 11:42:14 Images embedded
Suggestion To thank Quote Answer

1/9/2025 10:37 AM	Rate (0)
stockerr Joined: 2/3/2022 Last visit: 9/14/2025 Posts: 24 Rating: (0)	Currently I am using tia portal v16 version Where can I find the infeed function block? I can't find fb288 Attachment 6.JPG (108 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on