Dears,

I have installed on a IPC, PDT ETH v1.5 and when I try to connect a Panel IFP 15 will crash Windows in Blue screen of death (BSOD).

If I install PDT v1.6 (without ETH) and I connected via DisplayPort + USB, there is no problem.

I download software's from:

https://support.industry.siemens.com/cs/document/109792891/tool-downloads-for-simatic-ipcs-simatic-tablet-pcs-and-simatic-field-pgs?dti=0&lc=en-MZ 

In menu IFP ETH, I set as documentations the IP's static for Panel.

If I put Panel in LAN with PLC, then the Panel will appear and disappear in the list of IFP ETH, but if I put Panel in a LAN separately, just directly with IPC then is always appear in list because the panel have IP generated at 192.168.1.200.

If I check "Connect automatically"  then the IPC will crash many times.

Sometimes if I open Chrome Browser and explore on it, the IPC crash.

Can be an incompatibility with Chrome Browser?

Sometimes at startup the resolution is automatically set to 5000x3000, but the maximum of Display is 1920x1080. Can be problems with Intel video drivers? 

Do you encountered the same problem?

Closed cause question posted twice.

The second thread with the subject Panel Drivers Tools (PDT) with ETH v1.5 crash at connection to IFP 15 Industrial Flat Panel is published within the conferencePC-based Automation.