We had issue with Scalance XB208, we replaced with new, but still not getting ready

(TIA, PLC s7 1500)

Do we need any configuration for the same.

Can you please guide how can i set the IP and device name.....

AutoGen_6367207

Can you please guide how can i set the IP and device name.....

 The same way that you do it with all Profinet devices. First you need to configure the IP and Device name in the hw config of the project. Then you can select the device in the project tree and expand the view, Select Online & diagnostics, then a new window will open. From that window, on the left side you have a selection tree, expand Functions and then you will see Assign IP address and Assign PROFINET device name. Using those, you can do it.