Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TOUCH KEY BOARD OPERATION

Created by: kiranPCT at: 5/7/2010 11:30 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/7/2010 11:30 AM	Rate (0)
kiranPCT Regular Member Joined: 3/30/2010 Last visit: 7/26/2021 Posts: 13 Rating: (0)	hi, i used simatic panel pc677b for my one project. before i never work onsuch type of panel. OS and other fetuer are installed by siemens singapore. just now i started the graphic development. for that i used Wincc7.0 Sp1 software.i found at the time of working after i clicking IO field touch keyboard cannot open. external keyboard working that time. but i want to fill the value from touch keyboard. winflex have this facility.but i don't know wincc have or not. any particuler setting in Wincc program? the touch input software also install in PC. please help me. kiran

Suggestion To thank

5/7/2010 11:32 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already published in the following thread How configure touch keyboard facility to the IO field?. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on