Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Simotion D445 Problem

Created by: M.ABUBAKER at: 12/20/2020 7:51 PM (17 Replies)

Rating (2)

Thanks 1

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

12/22/2020 9:45 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/22/2024 Posts: 22431 Rating: (3029)	hi, no not need. regards Christoph

Suggestion To thank Quote Answer

12/22/2020 1:27 PM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	Hello Christoph, Iam very thankful for your generous support,Iwill try this fix but the link you provide seems like some software. i found some FW files in the following link with same method you mentioned to install the files in CF card: https://support.industry.siemens.com/cs/mx/en/view/31045047 advise to use the link above or proceed with FWSP software. I also tried some fix, I re-tighten all Profibus shields in the machines, the question is if there some problem with Profibus voltage and shielding can this result of the same serious system error and result of D445 shutdown?
	Last edited by: M.ABUBAKER at: 12/22/2020 13:47:22 Last edited by: Jen_Moderator at: 12/23/2020 06:53:30 Optimized link.
Suggestion To thank Quote Answer

5/25/2021 4:02 AM	Rate (0)
Hullua Member Joined: 5/26/2020 Last visit: 9/18/2024 Posts: 1 Rating: (0)	嘿嘿，小子，有没有你的问题解决了，我遇到了同样的问题，我尝试更新固件，但它不会发生第二次，如果我不更新的固件。

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Terry T

5/25/2021 2:05 PM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Hi Hullua, Please try to discuss your question in English language. This is an international community and we try to focus on one language. Posting in English will help you to get more response to your question. This is the translation of your question: Hullua Hey boy, is there any solution to your problem, I encountered the same problem, I tried to update the firmware, but it won't happen the second time if I don't update the firmware. Regards, Jen_Moderator

Suggestion To thank Quote Answer

8/25/2021 5:36 PM	Rate (0)
Terry T Member Joined: 9/1/2015 Last visit: 10/27/2024 Posts: 15 Rating: (0)	Dear my friend, have you solved this problem? I met the same problem.

Suggestion To thank Quote Answer

8/25/2021 5:39 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/22/2024 Posts: 22431 Rating: (3029)	which problem?

Suggestion To thank Quote Answer

5/13/2024 2:51 AM	Rate (0)
sethshi Member Joined: 7/27/2021 Last visit: 7/15/2024 Posts: 1 Rating: (0)	Dear Sir I have the same problem, the simotion FW version is 4.4, have you update the FW version and solve the problem? thank you.

Suggestion To thank Quote Answer

5/13/2024 6:18 AM	Rate (0)
Davinator Gold Member Joined: 1/4/2013 Last visit: 10/28/2024 Posts: 1129 Rating: (102)	If your Scout (TIA) has a different version then you can't go online. So you must upgrade your CF card with the proper firmware. End of the story
	Searching for Siemens used/new equipments ? Take a look here : https://www.ravettiautomation.com
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on