Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Simotion D445 Problem

Created by: M.ABUBAKER at: 12/20/2020 7:51 PM (17 Replies)

Rating (2)

Thanks 1

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

12/20/2020 7:51 PM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	Hello Guys, I have a problem with Simotion D445-2DP/PN. It keeps stopping with all LED lights flashing red, after restarting the module it works normally for less than 30 minutes and the same problem continue. I uploaded the station and the following errors occurs each time the problem happens: Event details: 1 of 202 : 12:33:30:975 am 07/07/92 Event ID: 16# F360:2425 Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 11: Fault number 35220, fault value 0x4000 Incoming event ................................................................................ Event details: 2 of 202 : 12:33:30:975 am 07/07/92 Event ID: 16# F360:2424 Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 10: Fault number 35220, fault value 0x4000 Incoming event ................................................................................ Event details: 3 of 202 : 12:33:30:967 am 07/07/92 Event ID: 16# F360:2423 Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 9: Fault number 35220, fault value 0x4000 Incoming event ................................................................................ Event details: 4 of 202 : 12:33:30:967 am 07/07/92 Event ID: 16# F360:2422 Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 8: Fault number 35220, fault value 0x4000 Incoming event ................................................................................ Event details: 5 of 202 : 12:33:30:959 am 07/07/92 Event ID: 16# F360:2421 Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 7: Fault number 35220, fault value 0x4000 Incoming event ................................................................................ Event details: 6 of 202 : 12:33:30:951 am 07/07/92 Event ID: 16# F360:2420 Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 6: Fault number 35220, fault value 0x4000 Incoming event ................................................................................ Event details: 7 of 202 : 12:33:30:943 am 07/07/92 Event ID: 16# F360:241F Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 5: Fault number 35220, fault value 0x4000 ................................................................................ Event details: 8 of 202 : 12:33:30:935 am 07/07/92 Event ID: 16# F360:241E Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 8994 0000 4000 Fault DO 4: Fault number 35220, fault value 0x4000 Incoming event ...................................................... I attached the diagnostic buffer log below Please help and advise Thanks and regards Attachment devicediagnostics.pdf (1021 Downloads)

Suggestion To thank Quote Answer

12/21/2020 5:54 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/22/2024 Posts: 22431 Rating: (3029)	hi, this is only the diagnosticbuffer of the sinamics. please also provide the diagnostic of SIMOTION CPU what is displayed in the BCD display if the error is present? Regards Christoph

Suggestion To thank Quote Answer

12/21/2020 3:09 PM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	Hello Christoph, the disply in the D445 shows F when the error occurs. i take the attached diagnostic buffer directly from the accessable nodes. note that each time the problem occur the D445 all LEDs flashing red and the module kicks all the communications eith profibus or profinet and feels just like it went power off. i hope all this can be helpful to diagnos the problem Attachment devicediagnostics.pdf (1037 Downloads)

Suggestion To thank Quote Answer

12/21/2020 3:11 PM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	attached, Screenshot of TM41 alarms which same in 8 axises Attachment TM41_axis0 Alarm history.jpg (1002 Downloads)

Suggestion To thank Quote Answer

12/21/2020 3:12 PM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	attached, TM41_Axis_0 online values from expirts list Attachment TM41_Axis_00_Online Vaues.pdf (926 Downloads)

Suggestion To thank Quote Answer

12/21/2020 3:13 PM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	attached, Dp6 drive axis 7 online values from expirts list Attachment DP6_Axis7_experts_List.pdf (891 Downloads)

Suggestion To thank Quote Answer

12/21/2020 3:58 PM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/22/2024 Posts: 22431 Rating: (3029)	Hi, internal FW Errror Event details: 35 of 403 : 09:20:17:190 pm 11/14/95 Event ID: 16# F360:B80F Additional information 4 / 5: 16# C0 50 Additional information 1 / 2 / 3: 16# 1F00 036F DE00 Technology package: 1F00h, start address: 036FDE00h Incoming event ................................................................................ Event details: 36 of 403 : 09:20:17:190 pm 11/14/95 Event ID: 16# F760:B818 Additional information 4 / 5: 16# C0 00 Additional information 1 / 2 / 3: 16# 0000 009B B368 Code position: 009BB368h Internal error, Incoming event ................................................................................ Event details: 37 of 403 : 09:20:17:190 pm 11/14/95 Event ID: 16# F760:B288 Additional information 4 / 5: 16# C0 00 Additional information 1 / 2 / 3: 16# 0000 2009 0814 A serious error has occurred. The system will be shut down, IFault : 20090814 Internal error, Incoming event .......................................................................... please check if a newer FW Version is available and also open a support Request Regards Christoph

Suggestion To thank Quote Answer

12/22/2020 12:26 AM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	Hello Christoph , So updating current D445 Firmware can solve the problem? The current version is 4.4 so what you recommend to go to 4.5 or just update to the latest 4.4HF11 version. Also please let me know the proper way to update frimware, via CF card files copy or through the Scout. And i really appreciate your help! Regards
	Last edited by: M.ABUBAKER at: 12/22/2020 01:29:18
Suggestion To thank Quote Answer

12/22/2020 5:52 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/22/2024 Posts: 22431 Rating: (3029)	hi, hello first you should use the latest V4.4 (HF18) . simple copy /paste the FW on the CF Card (Remove the old FW before, delete all expect the keys aqnd user folder) Download FW: https://support.industry.siemens.com/cs/ww/en/view/33119786

Suggestion To thank Quote Answer

12/22/2020 9:42 AM	Rate (0)
M.ABUBAKER Regular Member Joined: 3/15/2018 Last visit: 1/9/2024 Posts: 25 Rating: (0)	Hello, If i upgrade the firmware to same version and higher HF would t require to apply some fixes on the code like when i upgrade to higher version?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on