Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

need info on two machines

Created by: boneless at: 10/20/2006 2:21 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

10/20/2006 2:21 PM	Rate (0)
boneless Posts: 4 Rating: (0)	Hello everybody, My name is Ton and I'm a student, currently graduating at a company for Buildingautomation in Holland. For my project I am looking for some information, characteristic, about two machines: 1LA5 183 4AA 1LA7 163 4AA Can anybody help me or guide me to the right way to get this information? I tried the support request, but I havent got any response to that. Kind regard, Ton
boneless Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/28/2006 10:14 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello boneless, try this link A&D Mall If you check there for the Devices like: 1LA5 183-4AA this than you will find your wanted Information. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

10/30/2006 8:31 AM	Rate (0)
boneless Posts: 4 Rating: (0)	Thank you very much for your reply. However, I can't find the information that I am looking for. Maybe I can explain exactly what I need. I am graduating at a company for Building Automation, currently we are looking into a costumer who wants to save energy. One of the points is to replace the current motors in the HVAC, which have two speeds, for motors that can be controlled with a frequencycontroller. We are looking for curves on the torque vs the RPM and the RPM vs the power of the motors. All I found until now is just a few numbers, which wont do. Any help will be very welcome!
boneless Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/30/2006 10:12 PM	Rate (0)
Dave Posts: 271 Rating: (29)	Hello Ton, Here is a link to the M11 Catalog that will provide you will most everything you need: http://www.automation.siemens.com/sd/motoren/ftp/m11_03_04_en.zip Hope this helps...
Dave Posts: 271 Rating: (29)
Suggestion To thank Quote Answer

10/31/2006 11:08 AM	Rate (0)
boneless Posts: 4 Rating: (0)	Thanks again, I still don't seem to find what I am looking for...
boneless Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/31/2006 7:14 PM	Rate (0)
Dave Posts: 271 Rating: (29)	Boneless, Siemens offers a configuration tool that I'm aware of for Sinamics drives and the current version is SIZER V2.6. ACD can be ordered using following Order No. 6SL3070-0AA00-0AG0. It is a program that is approximately 350 Mbytes. A 1LA5183-4AA.. motor can be selected and the tool provides the torque curves for the motor. Another tool that may work that I do not have is the SD Configurator that comes with the CA01 Catalog which also comes on disk. I recommend that you contact your local sales office to order one or go to the Siemens Mall for more assistance. Hope this helps...
Dave Posts: 271 Rating: (29)
Suggestion To thank Quote Answer

11/1/2006 9:10 AM	Rate (0)
boneless Posts: 4 Rating: (0)	Thank you very much, I'll try that!
boneless Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on