Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error when loading PLC-data Windows 7 Enterprise 32Bit

Created by: Rune J at: 9/2/2010 11:05 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/2/2010 11:05 AM	Rate (0)
Rune J Posts: 9 Rating: (0)	Hello! I have installed the step 7 Basic V10.5 og my computer, operated by Windows 7 Enterprise (32-bit) it installs perfectly, runs a bit slow/laggy, but runs. when I want to load the PLC data into the CPU added in my project, an error appears (see attached dokument) Why does this error occur? Best Regards Rune J Attachment Unavngivet.jpg (742 Downloads)
Rune J Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/2/2010 12:13 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, Unhapply the STEP 7 Basic 10.5 SP2 is just released to Windows XP SP3 and Vista SP1...
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/2/2010 12:45 PM	Rate (0)
Rune J Posts: 9 Rating: (0)	thats not thought through! anyhow how come it installt without komplications?
Rune J Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/2/2010 2:47 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, A little bit OFFTOPIC - STEP 7 Basic v10.5 SP2 works in Windows 7 32bit Professional Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on