Industry Online Support
Technical Forum
5/31/2011 5:37 PM | |
Posts: 19 Rating: (0) |
Hi to all again. Until today we have not managed to run my CNC machine with Siemens 820M. Service man has uploaded on the machine the new data and now I have some errors that i need to remove my self. Like i wrote last year i have german language and teher is no english . So can somebody please help me to solve the errors step by step to finaly start the CNC machine? My errors are: PLC Alarme: ----------- 6000 Not-Aus kette ausgeloest 6005 Hauptantrieb ueberlast IA>IX 6006 Hauptantrieb stoerung 6008 Gewichtsausgleich stoerung 6009 Hauptantrieb uebertemperatur 6027 Steuerspannung fehlt NC Alarme: ---------- 2000 ORD 2 Not Aus PLC Meldungen: -------------- 7049 Bremse Z Geklemmt Splitted from Siemens 820M battery problem. |
Last edited by: O_Moderator at: 5/31/2011 8:39 PMnew subject after splitting |
|
5/31/2011 8:41 PM | |
Joined: 4/24/2009 Last visit: 2/19/2024 Posts: 2683 Rating: (135) |
Thread closed, because question is already published in the following thread 820M PLC and NC Alarm problem. Best regards O_Moderator |
Follow us on