9/19/2022 7:08 AM | |
Joined: 9/19/2022 Last visit: 9/20/2022 Posts: 1 Rating: (0) |
Dear sir.. We have Sinumerik 840d Controller in our machine with Rotary Table, But we are facing B-Axis Rotary table axis Enable missing problem. We need your support for Resolving fix the problem. Any additional details required please let me...Thank you. ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 09/19/2022 07:17:19New subject after splitting |
|
9/19/2022 7:52 PM | |
Joined: 10/17/2007 Last visit: 5/23/2024 Posts: 3991 Rating: (345)
|
information too less. tell me more story--only saying: "B-Axis Rotary table axis Enable missing"-- I don't think some one can help you now can you JOG B axis? Can you JOG it last week? something happed recently for your old machine which is running good for many years?
|
Last edited by: nulizhang at: 09/19/2022 22:39:48If you like my comments please |
|
9/20/2022 3:26 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Hello, Generally B rotary table has hydraulic clamping. So B axis control release & pulse enable signals are switched on based on table unclamp signal -taken from hydraulic circuit. So please check PLC logic pressure switch input signal - B table unclamp. Hope this helps. |
Follow us on