Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FACEPLATE INSIDE SHOWING ''NO OPEARTION'' MEASSGE IN STATUS

Created by: R&R at: 11/8/2012 6:58 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/8/2012 6:58 AM	Rate (0)
R&R Posts: 69 Rating: (3)	Dear experts, Kindly give a correct solution for the following issue we are facing: 1.Am using PCS7-v7.0,in that all the faceplates of meas monitor and pump showing No operation meassage in status.Why it shows like that,because pump is running but it shows like that status.I expect your reply ASAP.
R&R Posts: 69 Rating: (3)
Suggestion To thank Quote Answer

11/8/2012 2:13 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Have you process connection from HMI to the AS?
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

11/12/2012 3:13 PM	Rate (0)
R&R Posts: 69 Rating: (3)	dear expers, Find the enclosed screen for your reference. Attachment faceplate issue.JPG (237 Downloads)
R&R Posts: 69 Rating: (3)
Suggestion To thank Quote Answer

11/12/2012 5:52 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Hi, you seem to have a connection from HMI to the AS. So far this is good. Why exactly your have this status on your process object can not be seen on looking onto that picture. In my opinion it is looking like a problem in you process or in you logic. Its not a problem that is caused by PCS 7. Can you check the inputs and outputs of the related blocks. Maybe you can find error informations.
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on