Industry Online Support
Technical Forum
10/15/2009 1:23 AM | |
Joined: 9/27/2006 Last visit: 4/26/2024 Posts: 12257 Rating: (2665) |
Hello kadiru; There are a few threads that have discussed this point on our forum; the problem is that the DT format exists only in the PLC database, not in WinCC. Some form of conversion must be applied, preferably in the PLC program. Here is a link to one such threads, with a few solutions: /tf/WW/en/Posts/31195 Hope this helps, Daniel Chartier |
This contribution was helpful to1 thankful Users |
Follow us on