Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to copy PCMCIA card?

Created by: rezamohebbi at: 7/28/2019 6:56 PM (7 Replies)

Rating (1)

Thanks 3

8 Entries

7/28/2019 6:56 PM	Rate (0)
rezamohebbi Regular Member Joined: 3/22/2016 Last visit: 10/31/2024 Posts: 43 Rating: (0)	Hi I have a question about the pcmciacard on sinomerik 810d ccu1 . How do I copy the information inside the card Or get a backseat؟ Or can we get an image from the card? What software do I need? ------------------------------------------------------------------------------------------ Split from Flash PC card .
	Last edited by: Jen_Moderator at: 07/29/2019 06:29:28 New subject after splitting. Edited text for better reading.
Suggestion To thank Quote Answer

7/29/2019 5:08 AM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/4/2024 Posts: 4064 Rating: (357)	Normally You cannot copy PCMCIA card insert in 840D or 810D. they are regarding lenience . and Siemens do not support end user to use software (SINUCOPY) to do so. In your case 810D, CCU1, normally DO NOT need to insert SW Card into the CCU.
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

7/29/2019 11:18 AM	Rate (0)
rezamohebbi Regular Member Joined: 3/22/2016 Last visit: 10/31/2024 Posts: 43 Rating: (0)	Hi How to downloaded sinucopy software?
	Last edited by: rezamohebbi at: 07/29/2019 11:19:49
Suggestion To thank Quote Answer

7/30/2019 5:07 AM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/4/2024 Posts: 4064 Rating: (357)	No Free download
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

7/30/2019 12:49 PM	Rate (0)
rezamohebbi Regular Member Joined: 3/22/2016 Last visit: 10/31/2024 Posts: 43 Rating: (0)	Hi what is the order onmber sinucopy software?Is it a Siemens product?Do I also need the order nomber software simodrive 611 to install on Windows 7?
	Last edited by: Jen_Moderator at: 07/30/2019 14:07:51 Edited text for better reading.
Suggestion To thank Quote Answer

7/30/2019 8:47 PM	Rate (1)
Luke_N Bronze Member Joined: 4/28/2015 Last visit: 11/4/2024 Posts: 361 Rating: (38)	Hi rezamohebbi, Sinucom FFS (replacement of Sinucopy) forms part of the SinuCom software package which is not freeware and so must be purchased. V7.7 of this software package is available via part number 6FC5250-7AY00-7AG0. In order to read/write to the PCMCIA card you would also need a licensed copy of Cardware along with a physical port hardware on your device to access the card (Siemens Field PG M4 and below has this hardware interface port shipped as standard). Alternatively the system software can be ordered from Siemens pre loaded on to the card (desired version would need to be specified when ordering). Hope this helps Luke ...sent from App

Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users nulizhang rezamohebbi Shafay

9/19/2019 11:09 PM	Rate (0)
rezamohebbi Regular Member Joined: 3/22/2016 Last visit: 10/31/2024 Posts: 43 Rating: (0)	What software is the sinucom package made of?

Suggestion To thank Quote Answer

9/20/2019 8:41 AM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/4/2024 Posts: 4064 Rating: (357)	Normally Siemens do not support end users to play with PCMCIA card, I attached some basic information as your REF. Can you let me know why you need copy this card? what is your concern? Attachment SinuCom_FFS.pdf (485 Downloads)
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on