Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to install Microwin SP9 on Windows 7 - 64bit?

Created by: single at: 6/18/2012 11:29 AM (10 Replies)

Rating (3)

Thanks 5

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

6/18/2012 11:29 AM	Rate (0)
single Posts: 7 Rating: (0)	Hi All, Can you tell me how to install Microwin SP9 on Windows 7 - 64bit. Please give me your advice. Thank you for your support.
single Posts: 7 Rating: (0)	Last edited by: O_Moderator at: 6/18/2012 11:41 AM new subject after splitting from /tf/WW/en/Posts/38371#top
Suggestion To thank Quote Answer

6/18/2012 12:48 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, You need the full version to install, not just SP. Ask your local Siemens rep. [url=https://www.automation.siemens.com/partner/index.asp?HTTPS=REDIR&regid=WW&lang=en&comptcid=o] Contacts Worldwide [/url] Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

6/25/2012 9:44 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, If you have a STEP 7MicroWIN V4.0, then you can download the SP9. The SP 9 of STEP7 MicroWIN supports Win7 32 & 64 Bit. Goto: www.siemens.com/s7-200 then Download. Here you can download SP9. Read the notes carefully. Here you find installation intructions how to get it running with Win7 32/64 bit. Hope this helsp
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

6/19/2013 8:57 AM	Rate (0)
Er. Sanjay Mistry Posts: 79 Rating: (7)	No download found there & i have its setup but it shows the common problem as all are facing "searching for valid drivers" & then after a long waiting it shows unable to locate previous version files even if it is a fresh laptop. Really got frusted with Siemens Software bugs
Er. Sanjay Mistry Posts: 79 Rating: (7)
Suggestion To thank Quote Answer

6/19/2013 11:10 AM	Rate (2)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, You can only install the Update if you have the previous version installed. That is not possible on a windows 7 machine, but there is a trick. Copy from a PC with previous version the Microwin. EXE file, Usually found in Programfiles/Siemens/step7 microwin/Bin. Make that directory on the new machine, put the EXE file there and run setup again. When asked browse to the directory where you put the EXE file and Setup will now continue. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Rebz pawel.t LuWiack

6/21/2013 7:49 AM	Rate (0)
Er. Sanjay Mistry Posts: 79 Rating: (7)	Marcjan Hello, You can only install the Update if you have the previous version installed. That is not possible on a windows 7 machine, but there is a trick. Copy from a PC with previous version the Microwin. EXE file, Usually found in Programfiles/Siemens/step7 microwin/Bin. Make that directory on the new machine, put the EXE file there and run setup again. When asked browse to the directory where you put the EXE file and Setup will now continue. Regards, Marcjan Hello, i solved it, 1) Installed Microwin "SP 8" on windows 7 64 bit with few errors, but installation completed. PC restarted then started microwin sp8, but couldn't start. 2) Started installation of microwin SP 9 setup (Not update). asked for uninstall previuos version. i did it. & started SP 9 installation again. 3) Completed installation successfully & now i am working ok Microwin SP9 in Windows 7 64 bit
Er. Sanjay Mistry Posts: 79 Rating: (7)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

8/23/2013 12:12 AM	Rate (0)
Ivan Davila Advanced Member Joined: 5/15/2007 Last visit: 9/20/2024 Posts: 14 Rating: (2)	Thanks a Lot!!
	Ivan Davila iedavilah@gmail.com 8442188749 Saltillo, Coah. Mexico
Suggestion To thank Quote Answer

8/23/2013 1:15 AM	Rate (1)
Berg Silver Member Joined: 1/17/2006 Last visit: 11/18/2024 Posts: 554 Rating: (29)	Hi. There is another way. You can copy the folder "bin" of the older version V4 and past in C:\ then execute the setup.exe of the SP9... Ok it's done ! >> After installation you can delete the folder bin. regards.
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users apmcs1

3/2/2015 7:27 PM	Rate (0)
Rebz Regular Member Joined: 11/21/2012 Last visit: 11/4/2023 Posts: 3 Rating: (0)	Marcjan Hello, You can only install the Update if you have the previous version installed. That is not possible on a windows 7 machine, but there is a trick. Copy from a PC with previous version the Microwin. EXE file, Usually found in Programfiles/Siemens/step7 microwin/Bin. Make that directory on the new machine, put the EXE file there and run setup again. When asked browse to the directory where you put the EXE file and Setup will now continue. Hello Sir, Thank you for this post... i successfully made it, by simply following your procedure...

Suggestion To thank Quote Answer

11/23/2015 2:33 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by AutoGen_929797 is split to a separate thread with the subject Download Microwin. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on