Navigation

How to save the new configuration?

Created by: cri2017 at: 7/25/2017 4:01 PM (1 Replies)

7/25/2017 4:01 PM	Rate (0)
cri2017 Advanced Member Joined: 2/2/2017 Last visit: 4/27/2024 Posts: 36 Rating: (4)	Hi, I changed serial port from 232 to 485 using switchserialmode. This works until I reboot/reset/power off the IOT2040, then the port resets to 232. How to save the new configuration? Thanks! ------------------------------------------------------------------------------------------ Split from How to set RS485 mode.
	Last edited by: Jen_Moderator at: 7/26/2017 2:12:37 PM New subject after splitting
Suggestion To thank Quote Answer

7/25/2017 4:18 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Can you try it with the iot2000setup tool? If you go to Peripherals you can change the mode as well. Restart after that and check if it is still cahnged. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer