Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to use 3G mPCIe card for internet connection

Created by: bergmanu at: 7/10/2018 4:40 PM (37 Replies)

Rating (1)

Thanks 14

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

1/30/2020 12:33 PM	Rate (0)
Fe_lipe Silver Member Joined: 12/12/2016 Last visit: 4/8/2024 Posts: 640 Rating: (60)	Hello, You can transfer files using WinSCP -> SFTP -> port 22 BR

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Msuarez

5/6/2020 5:22 AM	Rate (0)
Keele Advanced Member Joined: 6/14/2019 Last visit: 10/23/2024 Posts: 21 Rating: (0)	bergmanu Hello together, attached you can find an example how to use a 3G mPCIe card for having conenction to the internet. In this example a Huawei MU609 modem is used. I hope you can make use of this since many people are asking about 3G connection Best regards! Dear Sir, Thanks for your useful guideline.I need someone help to allow my IOT2040 go to internet without ethernet connection. I have follow to purchase Huawei MU609 for my Simatic IOT2040 modem. It can detect the modem by running dmesg \| grep modem. However, after i configured the modem configuration with the "apn list" provided username,pass, and Pin. It show me "bad request to google" when ping www.google.com. can you guide me how do i fix the issue? - tried ifup modem, show me the result (interface modem already configured) - attached picture was modem configuration. Attachment 1.JPG (1003 Downloads)
	Last edited by: AutoGen_8615506 at: 05/06/2020 05:23:18 Last edited by: Jen_Moderator at: 05/06/2020 08:43:15 New subject after splitting Last edited by: Jen_Moderator at: 05/06/2020 11:25:54 Removed splitting-remark.
Suggestion To thank Quote Answer

5/6/2020 11:03 AM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 11/7/2024 Posts: 262 Rating: (5)	Hie Apart from the GSM , you can go for WIfi connectivity. You can use Edimax make wifi dongle , same can be connected to IOT. In IOT setup give Wifi details and internet will work. Also for GSM connectivity , which network SIM Card are you using.Once give a try to PIng 8.8.8.8 Thanks & Regards Javed Akhtar
	JAVED AKHTAR
Suggestion To thank Quote Answer

5/6/2020 11:28 AM	Rate (0)
Fe_lipe Silver Member Joined: 12/12/2016 Last visit: 4/8/2024 Posts: 640 Rating: (60)	Hello, Do you have any logs in /var/log/pppdlog ? Does the ifdown command work? Please also provide a screenshot of ifconfig output. BR

Suggestion To thank Quote Answer

5/13/2020 10:15 AM	Rate (0)
Keele Advanced Member Joined: 6/14/2019 Last visit: 10/23/2024 Posts: 21 Rating: (0)	Fe_lipe Hello, Do you have any logs in /var/log/pppdlog ? Does the ifdown command work? Please also provide a screenshot of ifconfig output. BR Dear sir, Below is my logfile, but i cannot understand. ================================================================ chat: May 13 07:47:07 CONNECT 14400000 Script /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat finished (pid 443), status = 0x0 Serial connection established. using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x40d61df9> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth chap MD5> <magic 0x268130d> <pcomp> <accomp>] sent [LCP ConfAck id=0x0 <asyncmap 0x0> <auth chap MD5> <magic 0x268130d> <pcomp> <accomp>] rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x40d61df9> <pcomp> <accomp>] rcvd [LCP DiscReq id=0x1 magic=0x268130d] rcvd [CHAP Challenge id=0x1 <5658feff66f959931ce304f87ac2da08>, name = "UMTS_CHAP_SRVR"] sent [CHAP Response id=0x1 <4ba66b7b5845f476aea6ed6c1a959c2d>, name = "maxis"] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [LCP ProtRej id=0x2 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1] sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfNak id=0x2] sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfReq id=0x0] sent [IPCP ConfNak id=0x0 <addr 0.0.0.0>] rcvd [IPCP ConfNak id=0x3 <addr 10.183.69.152> <ms-dns1 58.71.132.10> <ms-dns2 58.71.136.10>] sent [IPCP ConfReq id=0x4 <addr 10.183.69.152> <ms-dns1 58.71.132.10> <ms-dns2 58.71.136.10>] rcvd [IPCP ConfReq id=0x1] sent [IPCP ConfAck id=0x1] rcvd [IPCP ConfAck id=0x4 <addr 10.183.69.152> <ms-dns1 58.71.132.10> <ms-dns2 58.71.136.10>] Could not determine remote IP address: defaulting to 10.64.64.64 local IP address 10.183.69.152 remote IP address 10.64.64.64 primary DNS address 58.71.132.10 secondary DNS address 58.71.136.10 Script /etc/ppp/ip-up started (pid 495) Script /etc/ppp/ip-up finished (pid 495), status = 0xff Terminating on signal 15 Connect time 8.8 minutes. Sent 120 bytes, received 156 bytes. Script /etc/ppp/ip-down started (pid 832) sent [LCP TermReq id=0x2 "User request"] Script /etc/ppp/ip-down finished (pid 832), status = 0xff rcvd [LCP TermAck id=0x2] Connection terminated. chat: May 13 07:56:06 CONNECT 14400000 Script /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat finished (pid 844), status = 0x0 Serial connection established. using channel 2 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xdb1e9567> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <auth chap MD5> <magic 0x2704e52> <pcomp> <accomp>] No auth is possible sent [LCP ConfRej id=0x3 <auth chap MD5>] rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xdb1e9567> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x2704e52> <pcomp> <accomp>] sent [LCP ConfAck id=0x4 <asyncmap 0x0> <magic 0x2704e52> <pcomp> <accomp>] sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [LCP DiscReq id=0x5 magic=0x2704e52] rcvd [LCP ProtRej id=0x6 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1] sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfNak id=0x2] sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfReq id=0x2] sent [IPCP ConfNak id=0x2 <addr 0.0.0.0>] rcvd [IPCP ConfNak id=0x3 <addr 100.120.255.229> <ms-dns1 58.71.132.10> <ms-dns2 58.71.136.10>] sent [IPCP ConfReq id=0x4 <addr 100.120.255.229> <ms-dns1 58.71.132.10> <ms-dns2 58.71.136.10>] rcvd [IPCP ConfReq id=0x3] sent [IPCP ConfAck id=0x3] rcvd [IPCP ConfAck id=0x4 <addr 100.120.255.229> <ms-dns1 58.71.132.10> <ms-dns2 58.71.136.10>] Could not determine remote IP address: defaulting to 10.64.64.64 local IP address 100.120.255.229 remote IP address 10.64.64.64 primary DNS address 58.71.132.10 secondary DNS address 58.71.136.10 Script /etc/ppp/ip-up started (pid 847) Script /etc/ppp/ip-up finished (pid 847), status = 0xff Terminating on signal 15 Connect time 2.1 minutes. Sent 400 bytes, received 687 bytes. Script /etc/ppp/ip-down started (pid 883) sent [LCP TermReq id=0x2 "User request"] Script /etc/ppp/ip-down finished (pid 883), status = 0xff rcvd [LCP TermAck id=0x2] Connection terminated. chat: May 13 07:58:23 CONNECT 14400000 Script /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat finished (pid 894), status = 0x0 Serial connection established. using channel 3 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa88dfe3e> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <auth chap MD5> <magic 0x27265e5> <pcomp> <accomp>] No auth is possible sent [LCP ConfRej id=0x7 <auth chap MD5>] rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xa88dfe3e> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x27265e5> <pcomp> <accomp>] sent [LCP ConfAck id=0x8 <asyncmap 0x0> <magic 0x27265e5> <pcomp> <accomp>] sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [LCP DiscReq id=0x9 magic=0x27265e5] rcvd [LCP ProtRej id=0xa 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1] sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfNak id=0x2] sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfReq id=0x4] sent [IPCP ConfNak id=0x4 <addr 0.0.0.0>] rcvd [IPCP ConfNak id=0x3 <addr 100.64.55.8> <ms-dns1 58.71.136.10> <ms-dns2 58.71.132.10>] sent [IPCP ConfReq id=0x4 <addr 100.64.55.8> <ms-dns1 58.71.136.10> <ms-dns2 58.71.132.10>] rcvd [IPCP ConfReq id=0x5] sent [IPCP ConfAck id=0x5] rcvd [IPCP ConfAck id=0x4 <addr 100.64.55.8> <ms-dns1 58.71.136.10> <ms-dns2 58.71.132.10>] Could not determine remote IP address: defaulting to 10.64.64.64 local IP address 100.64.55.8 remote IP address 10.64.64.64 primary DNS address 58.71.136.10 secondary DNS address 58.71.132.10 Script /etc/ppp/ip-up started (pid 897) Script /etc/ppp/ip-up finished (pid 897), status = 0xff ======================================================================= 2) ifdown modem command is work. and i able to turn it on by ifup modem. 3) Please refer to attachment. ipconfig is not working command in putty. Attachment Capture.JPG (931 Downloads)

Suggestion To thank Quote Answer

6/23/2020 3:30 PM	Rate (0)
opichon Posts: 7 Rating: (0)	Hi, We bought the suggested Huawei Modem to get a 3G connection. We thought the SIM-Card adapter mentioned in your documentation was going to come with it but it did not. Could you please provide us with the reference of this SIM Card adapter? Thanks!
opichon Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/23/2020 4:07 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, we used this one. This is a german link, but I think you can see the model used. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users opichon

6/30/2020 3:12 AM	Rate (0)
Arkom Experienced Member Joined: 2/10/2017 Last visit: 10/25/2024 Posts: 53 Rating: (1)	I confirm ME909s-120 works for IOT2040 with this pdf procedure. Only one of my problem is I just can ping to IP address such as 8.8.8.8 or xxx.xxx.xxx.xxx, but I cannot ping to DNS name such as www.google.com. I need to add nameserver 8.8.8.8 in /etc/resolv.conf , then I can ping by DNS name and can send data to outside with DNS name.
	Last edited by: AutoGen_8579465 at: 06/30/2020 03:13:39
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu

7/26/2020 11:28 PM	Rate (0)
slcr Posts: 9 Rating: (0)	Dear all, I'm trying to configure a TELIT LE910C1-EU modem in IoT2040 and followed the steps indicated in the exampled posted by bergmanu, but it seems that the new interface is not recognized and I canot connect to Internet. I attach the following pdf file with all the steps that I've done: "Problems configuring modem TELIT LE910C1-EU with IoT2040.pdf". Please, any help, comment or hint on how to go on will be very wellcome! Thank you!. Attachment Problems configuring modem TELIT LE910C1-EU with IoT2040.pdf (959 Downloads)
slcr Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

7/27/2020 3:56 PM	Rate (0)
Fe_lipe Silver Member Joined: 12/12/2016 Last visit: 4/8/2024 Posts: 640 Rating: (60)	Hello, Please try flashing a fresh image and configuring the card over cellular options in: iot2000setup Kind regards!

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2000 Application

Follow us on