Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HT6 alarm displaying

Created by: ŠΜS at: 5/22/2011 7:59 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/22/2011 7:59 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Hello, I am using HT6 in 840D. In that User alarm is not displaying, only the alarm number displaying.Eg:700000..Any file required to display in it?
	Regards, ŠΜS
Suggestion To thank Quote Answer

5/23/2011 7:02 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	Hi, I remember when I use it on the machine I only setup in plc in OB100 call parameters. And everything work perfectly fine. But that was few years ago so i can not remember some details. With regards, makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

8/15/2011 5:16 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Does any one have an idea ? why alarm text is not appearing in the HT6...
	Regards, ŠΜS
Suggestion To thank Quote Answer

8/15/2011 7:55 PM	Rate (0)
SteveA Posts: 297 Rating: (41)	You have to load an alarm text file (like used on the PCU50) onto the HT6 using PC_IN. It's documented somewhere in Doc on CD, at least it was at some time... I had a file in the same format as the PCU50 alarm text file, but with the filename ALPUTX.T02, that was transferred into the HT6 using PC_IN. HTH, SteveA
SteveA Posts: 297 Rating: (41)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on