Navigation

Lost parameters on the Sinamics V20 after power failure

Created by: cusak at: 1/9/2022 5:51 PM (1 Replies)

1/9/2022 5:51 PM	Rate (0)
cusak Member Joined: 1/9/2022 Last visit: 1/9/2022 Posts: 1 Rating: (0)	We have a safety feature that works in a way of cutting power when doors are opened in our machine but after fitting a Sinamic V20 and setting the parameters I opened a door to check it was functioning correctly, closed and reset, the Sinamics unit came back on but lost all its parameters again, I have read that you have to modify parameter P971 in order to transfer data from RAM to EEPROM in order to save perminently but I have no P971 on the unit. Can anyone point me in the right direction?

Suggestion To thank Quote Answer

1/10/2022 7:44 AM	Rate (0)
Mr.V Silver Member Joined: 6/19/2019 Last visit: 10/29/2024 Posts: 705 Rating: (76)	Hello, I think you need just change access level P0003 to 3 (Expert) and then you can see p971 parameter in list Attachment 1.png (426 Downloads)

Suggestion To thank Quote Answer