2/22/2024 10:02 AM | |
Joined: 7/22/2020 Last visit: 4/17/2024 Posts: 5 Rating:
|
Hello, I need help reading mds 124 RFID , I installed the block ident profile found on this linkhttps://support.industry.siemens.com/cs/zm/en/view/109476945but I don't understand the parameters to put in the block entries. Windows Server 2008 R2 Standard (64 bit), service pack 1 WinCC 7.2 + Upd9, K7.2.0.9 |
Last edited by: The Helping Hand at: 02/23/2024 13:13:02Text formatting optimized Last edited by: The Helping Hand at: 02/27/2024 13:00:23Text formatting and link optimized |
|
2/22/2024 5:56 PM | |
Joined: 7/22/2020 Last visit: 4/17/2024 Posts: 5 Rating:
|
I am in step 7 V5.6 Today there is a little progress, I loaded the example project from this https://support.industry.siemens.com/cs/ma/fr/view/109483372/en I loaded everything into the cpu the only difference is that I use an RF186C interface, so I made the necessary modifications in the hardware configuration and modify the "Reader1.hwConnect.LADDR" from 100 to 102. When I launch a CMD init I have the RF186C which goes solid green but I have an error and my RF340R reader remains blue, I haven't found any documents explaining the error codes? I have attached some images There is no simpler functional box for reading an RFID ? |
Last edited by: The Helping Hand at: 02/27/2024 13:01:34Text formatting and link optimized |
|
2/22/2024 6:00 PM | |
Joined: 7/22/2020 Last visit: 4/17/2024 Posts: 5 Rating:
|
|
2/23/2024 6:59 AM | |
Joined: 2/10/2015 Last visit: 8/13/2024 Posts: 105 Rating:
|
The documentation can be found here |
Follow us on