Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Procedure for communication with 802D, EM277 and S7200

Created by: arundev at: 12/8/2017 1:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/8/2017 1:00 PM	Rate (0)
arundev Posts: 1 Rating: (0)	DO YOU HAVE ANY PROCEDURE FOR COMMUNICATING WITH 802D +EM277+S7200??? ------------------------------------------------------------------------------------------ Split from valve with 802d.
arundev Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 12/11/2017 10:06:52 AM New subject after splitting
Suggestion To thank Quote Answer

12/14/2017 10:03 AM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 11/19/2024 Posts: 10616 Rating: (828)	Hello, I'm not expert in CNC area but for first you need to know that S7-200 can act only as DP Slave, not Master. Via this info you need derive other infos...
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

12/14/2017 11:14 AM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (63)	Hi, The 802 is a budget control. I have not seen any hardware configuration set up in the plc programming package. I don't think the plc is capable of talking to other plc's over a network. Pee

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on