Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

putty connection refused

Created by: RKBIS at: 2/13/2017 5:45 AM (11 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

2/13/2017 5:45 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	Hi there, I am trying to access the IOT2020 device via putty but unable to do so due to the message saying the "connection refused". Please advise on how i can proceed further. Thank you in advance.

Suggestion To thank Quote Answer

2/13/2017 8:53 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi karthikk, this seems to be a network problem. Can you make sure that your PC and your IOT2000 are having IP addresses in the same IP range? If you are using the default IP address of the left port of the IOT2000 (192.168.200.1) your PC has to have an IP like 192.168.200.xxx. Is it possible to ping your IOT2000 from your PC? Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users TholoMonyai

2/14/2017 8:06 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	Noted. I have now switched to IOT2040. I didn't manage to login to the 2020 again after the previously mentioned problem. I have now managed to go into the 2040 via PuTTY. And i was trying to access the device using the Eclipse. Meaning to download an example and test run the code but i am facing difficulties here as well. It says the there is an error where the location path is the cause. But i have no idea on how to select the correct path (all steps in the example document have been followed & applied step by step but i am not able to run it successfully. Please help. Thank you in advance.

Suggestion To thank Quote Answer

2/14/2017 10:20 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Maybe you have a prototype version of the IOT2020? Then refer to this post: https://support.industry.siemens.com/tf/ww/en/posts/cannot-connect-to-192-168-200-1/156100/?page=0&pageSize=10 Can you post a screenshot of the eclipse error?
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RKBIS

2/15/2017 11:44 AM	Rate (0)
DevGuy Posts: 40 Rating: (2)	Which settings did you make in eclipse? Which paths did you provide? You have to tell eclipse the location where the binary should be stored.
DevGuy Posts: 40 Rating: (2)
Suggestion To thank Quote Answer

2/23/2017 4:06 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	Hi, attached is the screenshot when i clicked in debug Please help as i am stuck here...... Attachment problem occured_IOT eclipse.png (649 Downloads)

Suggestion To thank Quote Answer

2/23/2017 4:10 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	Hi, i have followed the settings shown in the attachment. Attachment SIMATIC_IOT2000_Getting_Started_V2.0.pdf (610 Downloads)

Suggestion To thank Quote Answer

2/23/2017 4:59 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	Now when i browse using new connection, i could not find TCF agent in the list. Please advise. Thank you.

Suggestion To thank Quote Answer

2/23/2017 5:05 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	Getting an error like attached. Attachment error.png (564 Downloads)

Suggestion To thank Quote Answer

2/23/2017 5:58 AM	Rate (0)
RKBIS Gold Member Joined: 2/20/2014 Last visit: 10/8/2024 Posts: 396 Rating: (38)	previous error was due to my ip setting in my laptop. Now already set IP but when i try to run as & etc...i am not w=getting error as attached. Attachment probelme occured.png (490 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on