Navigation

rf240r reader with rs232

Created by: EMKE at: 11/11/2013 11:34 PM (1 Replies)

11/11/2013 11:34 PM	Rate (0)
EMKE Posts: 3 Rating: (0)	I am using the rf240r reader with rs232 , com module cm1241. Initialy it used to read fine but as i added new features to my plc program i saved the programs under different names. It started getting inconsistent may be read five times, miss one then read again. As at now it is not resetting anymore and not reading but at times the fb164 says reset done but the light on the rfid is still flashing hence it is not even reading anymore and is return com status 2082, 3052, 3082.thanx
EMKE Posts: 3 Rating: (0)	Last edited by: O_Moderator at: 11/12/2013 9:32 AM new subject after splitting from /tf/WW/en/Posts/87560#top
Suggestion To thank

11/12/2013 9:35 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already published in the following thread using rf240r reader with rs232 Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank