Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 CONVERSION I/O Issue

Created by: mbarrett87 at: 6/28/2013 12:48 PM (5 Replies)

Rating (2)

Thanks 0

6 Entries

6/28/2013 12:48 PM	Rate (0)
mbarrett87 Posts: 65 Rating: (0)	Hi all, ive been given some code to work with thats been converted from S5 into simatic manager, i have the elctrical drawings for the origional job and my I/O addressing seems to be quite different.. for example my digital inputs on my S5 drawings start at I32.0 but there is no address near this in the converted STL... would the conversion have chnaged the I.o addressing?
mbarrett87 Posts: 65 Rating: (0)
Suggestion To thank Quote Answer

6/28/2013 1:06 PM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	mbarrett87 Hi all, ive been given some code to work with thats been converted from S5 into simatic manager, i have the elctrical drawings for the origional job and my I/O addressing seems to be quite different.. for example my digital inputs on my S5 drawings start at I32.0 but there is no address near this in the converted STL... would the conversion have chnaged the I.o addressing? Hi, Did you got any error while conversion, if so please upload the same. If possible please upload your S5 backup.
	Last edited by: Saravana kumar at: 6/28/2013 1:07 PM _______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

6/28/2013 1:22 PM	Rate (0)
mbarrett87 Posts: 65 Rating: (0)	Quite a few errors / warnings ive uploaded the S5 code any help would be great Attachment FRIGOSST.zip (451 Downloads)
mbarrett87 Posts: 65 Rating: (0)
Suggestion To thank Quote Answer

6/28/2013 1:42 PM	Rate (1)
sps-concept Gold Member Joined: 4/5/2006 Last visit: 8/13/2023 Posts: 642 Rating: (131)	Hello, and what is this in the AWL-file? [code] A I 32.3; O I 32.4; O I 32.6; A M 104.0;[/code] Regards André Räppel --------------------------------------------------------------------------------- www.raeppel.de work faster withinnovative PLC-Tools

Suggestion To thank Quote Answer

6/28/2013 1:56 PM	Rate (1)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	mbarrett87 Quite a few errors / warnings ive uploaded the S5 code any help would be great Hi, I have checked in your S5 backup as well as the STL source file. I could find the I 32.0 in both the backup. In S5 I 32.0 is used in the PB 14 and it is converted as FC 47 where it is available too. Here is tha screen of the STL file which is having I 32.0 Attachment S5.jpg (312 Downloads)
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

6/28/2013 1:59 PM	Rate (0)
mbarrett87 Posts: 65 Rating: (0)	Thanks guys, My mistake!!
mbarrett87 Posts: 65 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on