KhanhLe

 

ixo65

Take a look to these links, perhaps this help you:

https://ssl.arcor-secure.de/systeme-lauer.de/forum/pcs_f.htm

http://www.vanegmond.nl/fileserver/Lauer/Manuals%20en%20documentatie/LCA%20en%20PCS%20bedieningsdisplays/PCS/PCS900/English/P991_e.pdf

http://www.lauer.net.cn/products_admin/upphoto/pcspro_e.pdf

 Hi ixo65 

I have all of them, but i was confused because i had never use lauer hmi before 

i dont know "The memory address of S5 connect with Lauer is fix (example: if vobi=50, address connect with F1..F20 button, value display... is fix or not ) or can configure with different memmory address like new siemens HMI (example: F1: M100.0, F2: M20.7,F3: M40.4...)". thank you

 Hello

If you would take the effort of reading the manuals suggested by ixo65 , you will get all the answers to your questions.

e.g. the Manual of PCS900 says clearly :

Machine operation using 20 freely assignable keys; these F01 to F20 labeled keys can be application specifically inscribed and are provided to the controller as status bits. In addition, situation-related soft-key actions can be assigned to these keys.

40 freely usable LEDs: These can be assigned the indicating states »ON«, »DARK«, »FLASHING«,
»INVERS FLASHING«. A green and a yellow LED is allocated to each function key. 

These assignments are in a System Data area which is defined using pcspro software.

Although I have never personally worked on this panel, I believe that it is possible to upload the configuration from the panel if you have the right version of PCSpro software and cable.

You will need the existing configuration of the PCS900 panel to figure out which data areas are assigned.

Hope this helps

Cheers
Navnag