Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S71200 SIMULATION WITH S7 PLC SIM V12

Created by: IYYAPPAN S at: 4/1/2013 1:20 PM (10 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

4/1/2013 1:20 PM	Rate (0)
IYYAPPAN S Experienced Member Joined: 12/6/2006 Last visit: 7/8/2024 Posts: 92 Rating: (0)	Dear All We are using an S71214 CPU for one project , we have recently bought a S7PLC SIM V12 & TIA ortal V12 Proff. Please inform us it is possible to communicate S71200 in S7 PLC SIM V12 Regards Iyyappan S

Suggestion To thank Quote Answer

4/1/2013 1:34 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/11/2024 Posts: 4351 Rating: (1452)	Hi, The PLCSim of STEP 7 V12 simulates just S7-300, 400 and 1500. !200 is not yet simuled...
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/1/2013 1:45 PM	Rate (0)
IYYAPPAN S Experienced Member Joined: 12/6/2006 Last visit: 7/8/2024 Posts: 92 Rating: (0)	Hi Pegia Any other options are availabel to Simulate S71200? Regards Iyyappan S

Suggestion To thank Quote Answer

4/1/2013 2:34 PM	Rate (0)
Mo.Sa Silver Member Joined: 8/1/2012 Last visit: 9/2/2024 Posts: 179 Rating: (15)	IYYAPPAN S Hi Pegia Any other options are availabel to Simulate S71200? Regards Iyyappan S if your logic is simple you can make a project with s7-300 and test it good luck

Suggestion To thank Quote Answer

4/1/2013 3:25 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/11/2024 Posts: 15388 Rating: (2443)	IYYAPPAN S Hi Pegia Any other options are availabel to Simulate S71200? Regards Iyyappan S I use the s7-1200 starter kit and use the plc on my desk to develop and simulate the running process.
	science guy
Suggestion To thank Quote Answer

4/1/2013 5:37 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/11/2024 Posts: 4351 Rating: (1452)	Hi, sometimes is easy to migrate the 1200 to 1500 instead of 1200 to 300. Both (300 and 1500) could be simulated in STEP7 Professiona V12
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mo.Sa

4/2/2013 10:09 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	IYYAPPAN S Dear All We are using an S71214 CPU for one project , we have recently bought a S7PLC SIM V12 & TIA ortal V12 Proff. Please inform us it is possible to communicate S71200 in S7 PLC SIM V12 Regards Iyyappan S Hello Mr. IYYAPPAN, You have trobule only in case if you have STEP 7 Basic v12. A workaround can be as Mr. Denilson Pegaia said, you can create your program in S7-1200 and simulate using S7-1500 (as S7-1200 and S7-1500 behaviour is similar >90%) only prerequisite for this will be STEP 7 Professional v12 and S7-PLCSIM v12
	Like it? Rate it!
Suggestion To thank Quote Answer

2/19/2014 7:16 AM	Rate (0)
Ashish Vasavir Experienced Member Joined: 2/8/2009 Last visit: 4/9/2024 Posts: 56 Rating: (3)	convert your project in S7 1500. and than simulate it using PLC SIM v12. for this "add new device" to your current project and for this select hardware as S7 1500. after this copy "Program blocks", "PLC tags", and all folders that you used for your s7 1200 project. compile this and check if programming is compatible for S7 1500 or not if necessary chage according. and than simulate in PLC SIM v12.

Suggestion To thank Quote Answer

4/16/2014 11:21 PM	Rate (0)
Xhrismar Posts: 1 Rating: (0)	you could use "SPS SIMU MICRO" even its not exactly a smart program, you could do something
Xhrismar Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/30/2014 4:10 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/8/2024 Posts: 4111 Rating: (195)	follow up question published by gullfjunis split to a seperate thread with the subjectS71200 SIMULATION WITH S7 PLC SIM V13. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on