Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMOSIM. Controller is in STOP mode. Event ID 16# F360:B2BA

Created by: OleOre at: 2/22/2019 10:00 AM (3 Replies)

Rating (0)

Thanks 3

4 Entries

2/22/2019 10:00 AM	Rate (0)
OleOre Posts: 26 Rating: (0)	Dear all, I try to use SIMOSIM at first time. When I download the new generated project without any drives, axis and programs to controller in simosim, the downloading is successfull, but the controller is in stop mode with fault "Operating mode STOP was initiated due to: 3 Note: 1." Event ID is 16# F360:B2BA Screenshot is attached Controller: D435-2 DP/PN Simotion Scout TIA: V5.2.1.0 What I did incorrect? Thank you in advance! Attachment Simosim fault f360_b2ba.jpg (74 Downloads)
OleOre Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

2/22/2019 10:03 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	hello, no program ion the peripherialfaulttask. in simisom the drive is already present and cause a peripherial diagnostic interrupt which must be mnanaged with a progrma in the peripherialfaulttask. regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users OleOre NS73

2/25/2019 7:32 AM	Rate (0)
OleOre Posts: 26 Rating: (0)	Dear ChristophD, thank you for answer. Could you share the manual with the list of these SIMOTION or SIMOSIM faults and their description?
OleOre Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

2/25/2019 7:46 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, you can find a list in the Simotion Runtime Basuc Functions https://support.industry.siemens.com/cs/ww/en/view/109757312 Capter 5.3.6.8 Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users OleOre

|

Share this page:

Share this page on...

Follow us on