Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sinumerk 820t

Created by: sun367 at: 6/30/2006 9:42 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/30/2006 9:42 AM	Rate (0)
sun367 Posts: 20 Rating: (0)	Goodday to all, System: Cpu-SINUMERIK 820 ga2/ga3 operating panel-sinumerik 820 t plc programme -step5 Problem Currently im using S5 cables 9pin to 15pin, but this sinumerik i have to use 9pin to 25pin. Please help me by giving me the cable pin out for Step 5 programming cables. Thank you in advanced. Best Regards, sun367[:)]
sun367 Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

7/4/2006 10:05 AM	Rate (0)
shanny Posts: 44 Rating: (0)	Hi, The 820T GA2/GA3 can use a standard RS232 cable. The link forthe GA2/GA3controller is not 20MA current loop but V24. I use an off the shelf comms cable available from any computer store. Pin out here if you want to make your own. http://www.technick.net/public/code/cp_dpage.php?aiocp_dp=pinadaser_9to25 Shanny
shanny Posts: 44 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on