Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tool requested with T,S,M softkey

Created by: Import-User-1 at: 4/5/2013 11:49 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/5/2013 11:49 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Import of a question from user basarte8 basarte8 Hello, We have two different types of tools that they are used with different heads. In our own M6 cycle we show an alarm message when the tool requested doesn't match with the head in the machine. In AUTO or MDI, the tool change is running properly, but when we ask for a tool from T,S,M softkey, the tool change is performedand does not take into account whether the requested tool matches the head. What can I do that the CNC runs the M6 cycle like it was in AUTO, ie it doesn't consider the cycle in only one step?. (I have cancelled the SBLOF function). 840D SL -73 OPERATE NCU V4.5 + SP01 + HF03 SOFTWARE V4.5 + SP01 + HF03 Thanks a lot!
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

4/8/2013 10:47 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi You can try to use a STOPRE before the alarm. Good luck Nit

Suggestion To thank Quote Answer

4/8/2013 2:53 PM	Rate (0)
basarte8 Regular Member Joined: 12/12/2006 Last visit: 9/21/2023 Posts: 21 Rating: (0)	Thanks for your answer, but our cycle is full of STOPREs and the cycle doesn't stop in any one.

Suggestion To thank Quote Answer

4/10/2013 6:27 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi With STOPRE you don't stop the cycle. You only stop the preprocessing in order to give the machine time to execute all the necessary comands. So if you need to verify a state of the machine in some point, you must put STOPPRE before that command. Good luck Nit

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on