Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

V18 Unified PC RT on IPC277G

Created by: Ton Verra at: 4/5/2023 3:22 PM (11 Replies)

Rating (1)

Thanks 8

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

4/5/2023 3:22 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	Hi all, Currently programming my first project using Unified, so far I like the way it looks, I hate how steep the learning curve is. Running a simulation of the HMI and PLC (ET200SP), and all values are showing, however I am unable to change any values, the cell just blinks red. I am sure I am forgetting something silly, but I am not able to find what I am doing wrong. Any pointers would be greatly appreciated. Attachment Screenshot 2023-04-05 101917.png (290 Downloads)

Suggestion To thank Quote Answer

4/5/2023 7:38 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 10/27/2024 Posts: 1560 Rating: (169)	Hello, try to check, if there is no limit on the Tag? Also check if the user is not just monitor only. good luck Attachment Capturar.PNG (283 Downloads)
	Last edited by: rdoliveira at: 04/05/2023 19:42:10 "Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ton Verra

4/6/2023 11:59 AM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	Hi! Yes that all looks good. If I copy the field and change it to a local/internal variable, I can change it without problem. I believe it to be something in the communication between the HMI and PLC (both simulated). I tried enabling/disabling legacy communication without luck. Values update in the HMI when I change them in the PLC, I just am not able to change them from the HMI. Very strange.

Suggestion To thank Quote Answer

4/6/2023 12:18 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 10/27/2024 Posts: 1560 Rating: (169)	Hello, Check the permissions, in the Memories, and in the "DB" of the CLP. good luck Attachment Capturar.PNG (274 Downloads)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ton Verra

4/6/2023 1:31 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	Hello again, No that is all good too. The PLC part is virtually identical to what we have used with the regular comfort panel. Could it be the certificates? I just believe if anything is wrong there it would not show values either..

Suggestion To thank Quote Answer

4/6/2023 1:55 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 10/27/2024 Posts: 1560 Rating: (169)	Hello, In v2.9 it talks about certificate yes. see this LINK what is the firmware version of your PLC? see this LINK good luck
	Last edited by: rdoliveira at: 04/06/2023 14:05:57 "Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ton Verra

4/6/2023 2:11 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	For now I am simulating it, but it is set up as V2.9 (CPU 1512SP F-1 PN). Out of curiosity I changed the firmware to V2.8 but I am getting the same error. I enter a new value, it blinks red and reverts to whatever it was.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

4/6/2023 3:05 PM	Rate (1)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 10/27/2024 Posts: 1560 Rating: (169)	Hello, if you don't have any more suggestions from anyone here, you can make a support request from your region. LINK good luck
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ton Verra

4/6/2023 3:09 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	Yes, will do, I was hoping this would be a small issue. Thanks for your help!

Suggestion To thank Quote Answer

4/6/2023 3:51 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 10/27/2024 Posts: 1560 Rating: (169)	Ton Verra Yes, will do, I was hoping this would be a small issue. Thanks for your help! OK, later if you can post the results here, it would be good for others to see the solution. good luck.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on