Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

V20 firmware

Created by: Tractor at: 10/3/2023 4:39 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/3/2023 4:39 PM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 11/8/2024 Posts: 1146 Rating: (142)	I Have: 6SL3210-5BB11-2AV0 FW 3.51 I am unable to access connector setting P2889 / 2890 Using access level 4. Is this a known 'feature' for this V20 version? Many thanks Tractor
	Tractor
Suggestion To thank Quote Answer

10/4/2023 7:16 AM	Rate (0)
JBS98 Regular Member Joined: 7/19/2022 Last visit: 11/8/2024 Posts: 419 Rating: (71)	Hello Tractor, To modify these parameters you need Access Level 3 (Expert) as indicated in the manual (pag. 330): SINAMICS V20 Operating Instructions
	If this Information really helps, you could use the Rate function Best Regards, JBS98
Suggestion To thank Quote Answer

10/5/2023 9:02 AM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 11/8/2024 Posts: 1146 Rating: (142)	Thanks for the response, these parameters are not available, even with the suggested access. As the FW is early, is it possible that there is a omission on the FW? I am trying to resolve the issue below, 'analogue input comparator', and would prefer to offer a 'tested' solution. The device which I have is very old (FW 3.51), and have discovered that P2889 & P2890 are not available so cannot offer a proven solution. Compare input analogue, switch dig output at 9.5Volts https://support.industry.siemens.com/forum/gb/en/users/profile/3403638/ Tractor
	Last edited by: Tractor at: 10/05/2023 09:39:11 Tractor
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on