Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Automation License Manager cannot detect disks

Created by: Giedrius_Kai at: 1/18/2012 5:43 PM (19 Replies)

Rating (3)

Thanks 7

Result pages:: |; 1 | 2; |

20 Entries

Entries per page: 10 | all

1/21/2012 1:23 PM	Rate (0)
Giedrius_Kai Experienced Member Joined: 1/16/2012 Last visit: 9/8/2022 Posts: 72 Rating: (3)	I did that already. Waiting for a reply. Regards, Giedrius Kai.

Suggestion To thank Quote Answer

1/23/2012 4:49 PM	Rate (0)
Giedrius_Kai Experienced Member Joined: 1/16/2012 Last visit: 9/8/2022 Posts: 72 Rating: (3)	Here's the solution: -Uninstall the Automation License Manager via control panel \ addremove software -Reboot -Delete the file "almdb.sdf" -Reboot -Install the Automation License Manager again It helped me and it works now. Regards, Giedrius K.

Suggestion To thank Quote Answer
This contribution was helpful to 5 thankful Users Aret UMENCHO O_Moderator cliff.pennalligen Md Gouse

3/27/2012 1:52 AM	Rate (0)
krux Experienced Member Joined: 1/21/2010 Last visit: 11/18/2024 Posts: 15 Rating: (1)	Hi Giedrius_Kai, could you tell me where is the filealmdb.sdf located ? regards, krux

Suggestion To thank Quote Answer

3/27/2012 9:21 AM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (174)	UMENCHO Maybe I am wrong but: In case 'Missing license keys' selected there is not possible to expand My Computer tree. In case of 'Installed license keys' selected there are possibiliti to expand My conputer tree, but there is not possible to see the dick drive. Only Floppy and C:, D:...(hard disk). Best regards, Hristo Mihalev I think this was the main cause, too. But anyway, you solved it.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

3/27/2012 7:36 PM	Rate (0)
ok2cw Posts: 5 Rating: (0)	Hi all, I have been having the same problem. Roughly every 14 days I have to reinstall Licence Manager. It is the fastest solution . I am using HP notebook Windows 7 64-bit, Wincc Flexible 2008 and Step7 v5.5 with the latest Service Packs. Bye
ok2cw Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/6/2012 6:10 PM	Rate (0)
Vishwam Posts: 1 Rating: (0)	Hi ock2cw, Having the same problem. I have already reinstalled the ALM, but it si not working. Now am reading this post but am unable to find the file "almdb.sdf". Since you've been doing it quite often, can you please help as to where is this file. Thanks, Vish
Vishwam Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/10/2017 5:46 AM	Rate (0)
Cancel_me Advanced Member Joined: 7/8/2013 Last visit: 11/18/2024 Posts: 30 Rating: (0)	Hi, For those who still encounter the same problem the file mentioned can be found here: C:\ProgramData\Siemens\Automation\Automation License Manager\logging Jonel

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users cliff.pennalligen

4/27/2021 11:47 AM	Rate (0)
Ravians Member Joined: 3/26/2021 Last visit: 3/14/2022 Posts: 1 Rating: (0)	Hello! I am facing the same issue for quite a while now. I have followed your mentioned steps but still it doesn't work for me. License manager shows just My Computer but not the C or any other drive. Kindly assist.

Suggestion To thank Quote Answer

10/1/2021 8:47 AM	Rate (0)
Ralebs Advanced Member Joined: 3/10/2015 Last visit: 10/23/2024 Posts: 13 Rating: (0)	Hi Ravians, May be this one can help: When you open automation license manager, on view selection, make sure that license key is selected. Regards.

Suggestion To thank Quote Answer

10/20/2021 9:46 PM	Rate (0)
Cory Welch Member Joined: 7/3/2018 Last visit: 3/8/2024 Posts: 1 Rating: (0)	I had this issue recently with ALM 6.8 it was due to a special character in the name for the drive. I'm just posting this in case anyone else has this issue in the future.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on