Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics DCM V1.4: how to upgrade Tia Portal V13 and S7 Technology V4.2SP3

Created by: Rick_Nov at: 11/27/2014 11:47 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

11/27/2014 11:47 AM	Rate (0)
Rick_Nov Member Joined: 6/24/2014 Last visit: 7/6/2024 Posts: 16 Rating: (0)	Hi all, a my customer bought drives Sinamics DCM V1.4 and I should make a project for commissioning. In my PC is installed Tia Portal V13 in a HD partition (Win7) and S7 Technology V4.2 SP3 in other partition (Win XP). Both sws haven't the DCM V1.4's SSP. How can update these sw? Especially Tia Portal? Thank you in advance for answers. Have nice day

Suggestion To thank Quote Answer

11/27/2014 3:05 PM	Rate (0)
KSN Platinum Member Joined: 8/25/2006 Last visit: 11/11/2024 Posts: 2211 Rating: (280)	Hello. Look at thisthread. Latest GSD files for DCM arehere.

Suggestion To thank Quote Answer

11/28/2014 11:22 AM	Rate (0)
Rick_Nov Member Joined: 6/24/2014 Last visit: 7/6/2024 Posts: 16 Rating: (0)	Hi KSN, thank you for answer. I've already istalled the GSD file, but I need the SSP file because, without it, I cannot parametrize the module and I cannot connect to the module online. I read that the DCM's V1.4 SSP file are available in the new SP4 for S7Technlology but what about the Start Driver embedded in Tia Portal V13? Thank you agaiin, have a nice day

Suggestion To thank Quote Answer

11/28/2014 11:39 AM	Rate (0)
KSN Platinum Member Joined: 8/25/2006 Last visit: 11/11/2024 Posts: 2211 Rating: (280)	Hello. As I know StartDrive supports only Sinamics G120/G110. S7-Technology support DCM: Service Pack 4 for S7-Technology V4.2

Suggestion To thank Quote Answer

11/28/2014 11:56 AM	Rate (0)
Rick_Nov Member Joined: 6/24/2014 Last visit: 7/6/2024 Posts: 16 Rating: (0)	Hi KSN, so how can I do? Should I install Step7 and S7Technlology or Starter? And what about if I'd have a PLC S71200 as master on profinet network and DCMs as slaves? Should I work with separate SWs? One (TIa Portal) for the PLC and other one for the drives? Thank you again

Suggestion To thank Quote Answer

11/28/2014 12:10 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/11/2024 Posts: 22444 Rating: (3029)	Hello, i think the best way is to install the Starter on the partition which contains the TIA Portal. At the moment there is no other solution to projecting this constellation, one SW(TIA) for the PLC and one SW for the Drive(STARTER). Regards Christoph

Suggestion To thank Quote Answer

11/28/2014 12:24 PM	Rate (0)
Rick_Nov Member Joined: 6/24/2014 Last visit: 7/6/2024 Posts: 16 Rating: (0)	Hi all, thank you for answers. So ok I'll do new installations. Have a nice day, see you on next thread Rick

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on