Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication of hmi and pc with cpu-224 simultaneously

Created by: jass at: 5/17/2012 9:00 AM (13 Replies)

Rating (0)

Thanks 7

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

5/19/2012 4:28 PM	Rate (0)
jass Posts: 20 Rating: (0)	Thanks dear, Finally I havegot the solution!!!!!!!! In S7-200 PLCit ispossible to communicate HMI & PC together on the same port.Just change the HMI 'CONNECTIONS' settings to"number of masters=2" and then download hmi backup in the HMI. Regards.
jass Posts: 20 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users Darius SolutionFinder Anit Kumar mirip

5/20/2012 4:02 AM	Rate (0)
SolutionFinder Posts: 559 Rating: (87)	Thanks a lot jass, You have given very good solution.
SolutionFinder Posts: 559 Rating: (87)
Suggestion To thank Quote Answer

5/20/2012 7:57 AM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	jass Thanks dear, Finally I havegot the solution!!!!!!!! In S7-200 PLCit ispossible to communicate HMI & PC together on the same port.Just change the HMI 'CONNECTIONS' settings to"number of masters=2" and then download hmi backup in the HMI. Regards. Thnaks for the Sharing information and result. Very nice!!!
	VANDE MATARAM.....
Suggestion To thank Quote Answer

11/3/2015 12:38 PM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 10/31/2024 Posts: 1024 Rating: (14)	New question published by barsa is split to a separate thread with the subject Transfering a backup from the PC to an HMI device OP77b. Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on