Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

317 software programming system error

Created by: zym1971 at: 6/14/2008 5:46 PM (15 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

6/24/2008 6:12 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Reattach it again - i can't see anything^(
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

6/24/2008 7:37 AM	Rate (0)
zym1971 Posts: 11 Rating: (0)	Sorry,I have tried about 5 times,but I can't attach my program *.zip,the forum " Action not completed We apologize, but an unknown error has occured in the forums. This error has been logged." can you give me your mailbox for send my software? then ,you attach it there.Thanks! Best regards!
zym1971 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

6/24/2008 12:51 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/12/2024 Posts: 4040 Rating: (195)	Hello zym1971, can you give my more information about what you have done? Have seen, that others have published attachments today. Maybe you file is to big? An upload of a bigger file than 1MB may cause a failure. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

6/25/2008 3:01 AM	Rate (0)
zym1971 Posts: 11 Rating: (0)	Thanks everyone for the help.my attachment is 370k size.but i can't attach it. i sent to Aret:)).Waiting hem to check and attach it here.
zym1971 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

6/25/2008 10:04 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Hereisoriginalfile Attachment Jj0624.zip (240 Downloads)
Aret Posts: 2348 Rating: (264)	Last edited by: Aret at: 6/25/2008 10:06 AM
Suggestion To thank Quote Answer

6/25/2008 10:05 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Hm. i couldn't open the project - maybe someone can^) 1. FC102 uses db_anemo not db_anemo_db200 2. Place gloabal symbols in " like "db_anemo_db200" 3. Fc103 uses DB201 (not 200) After i made all corrections (created DB1 with name db_anemo_db200, make FCs to work with this DB) - everything works without mistakes So my code (originally extracted from your project SCL sources) DATA_BLOCK DB1 STRUCT WS : DINT; WINDSP : ARRAY[1..600] OF DINT; LOOP : INT; LOOP2 : WORD; WS_AVR_10MIN : DINT; END_STRUCT BEGIN END_DATA_BLOCK FUNCTION FC102: INT VAR_TEMP addof_s :DINT; I :INT; average :DINT; index_avr :INT ; END_VAR BEGIN addof_s := 0; FOR I:= 1 TO 60 BY 1 DO IF "db_anemo_db200".windsp[I]=0 THEN m256.7 :=1; addof_s := 0; ELSE addof_s := addof_s + "db_anemo_db200".windsp[I]; m256.7:=0; END_IF; END_FOR; average := (addof_s DIV 60); "db_anemo_db200".ws_avr_10min := average; FC102 := 102; END_FUNCTION FUNCTION FC103: INT VAR_TEMP // Temporary Variables WSP1 :DINT; WSP2 :DINT; WSP :DINT; POW2 :DINT; POW1 :DINT; POW :DINT; RPM :DINT; RPM1 :DINT; RPM2 :DINT; A :DINT; B :DINT; I :INT; I1 :INT; END_VAR BEGIN WSP := DWORD_TO_DINT(MD604); FOR I:= 0 TO 320 BY 20 DO WSP1 := DWORD_TO_DINT(DB1.DD[I]); WSP2 := DWORD_TO_DINT(DB1.DD[I+20]); POW1 := DWORD_TO_DINT(DB1.DD[I+8]); POW2 := DWORD_TO_DINT(DB1.DD[I+28]); RPM1 := DWORD_TO_DINT(DB1.DD[I+4]); RPM2 := DWORD_TO_DINT(DB1.DD[I+24]); IF WSP >= WSP1 AND WSP < WSP2 THEN A := (RPM2 - RPM1) / (WSP2-WSP1); B := RPM1 -A * WSP1 ; RPM := A * WSP + B; A := (POW2-POW1) /(WSP2-WSP1); B := POW1-A * WSP1; POW :=A*WSP+B; MD612:=DINT_TO_DWORD(RPM); MD616:=DINT_TO_DWORD(POW); DB2.DD[460]:=DINT_TO_DWORD(RPM); DB2.DD[464]:=DINT_TO_DWORD(POW); EXIT; END_IF; END_FOR; FC103 := 103; END_FUNCTION
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on