Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

1200 CPU Read/Write Password Protection Removal

Created by: TechkidPrabu at: 10/7/2011 8:45 AM (9 Replies)

Rating (0)

Thanks 5

10 Entries

10/7/2011 8:45 AM	Rate (0)
TechkidPrabu Posts: 9 Rating: (0)	Hello friends, Below are details of PLC that am currently using , PLC - SIMATIC 1200 CPU - CPU 1214 DC/DC/DC Firmware - V2.2 Order No. - 6ES7 214-1AE30-0XB0 Issue: I enabled CPU Read/Write protection from the Properties of that CPU.Now i forget the Password for read/Write acces.Can anyone give solutions to remove or decode the CPU Read/Write Password protection option. I have already tried "Memory Resetting" and "Firmware Upgradation".But it was not usefull. Attachment 1200PLC_CPU_Protection.JPG (3239 Downloads)
TechkidPrabu Posts: 9 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users shambhu sinha

10/7/2011 9:10 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (702)	Hello, See manual https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=S7-1200+card+delete&ID=36932465&ehbid=36932465] page 104 Recovery from a lost password If you have lost the password for a password-protected CPU, use an empty transfer card to delete the password-protected program. The empty transfer card erases the internal load memory of the CPU. You can then download a new user program from STEP 7 to the CPU. Regards, Marcjan
	Last edited by: Marcjan at: 10/7/2011 9:11 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Tomy Master TechkidPrabu

10/7/2011 12:14 PM	Rate (0)
TechkidPrabu Posts: 9 Rating: (0)	Thanks friend, I tried a Transfer Card method and it worked fine.Now i reset my PLC's Password-Protection and able to access all functions.
TechkidPrabu Posts: 9 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

3/22/2013 5:44 PM	Rate (0)
Moonwalker Regular Member Joined: 7/27/2011 Last visit: 2/22/2023 Posts: 2 Rating: (0)	Hi Marcjan! I have the same problem, but i want make you a question.... previously i have to make a backup of mi plc program? The program in the plc it´s only source i have. When introduces the transfer card in to the plc, the program are looses, is it correct? What do you recommend?

Suggestion To thank Quote Answer

3/23/2013 5:11 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (702)	Hello, It's a verry good thing to always make/ have a backup when working with a PLC. And in this case ,yes the program will be lost. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

3/24/2014 8:38 AM	Rate (0)
GrasserF Posts: 344 Rating: (6)	new question is splittet to PLC s7 1200 password protected, few questions
GrasserF Posts: 344 Rating: (6)
Suggestion To thank Quote Answer

12/14/2015 8:51 PM	Rate (0)
dieber Posts: 1 Rating: (0)	Good day The link https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=S7-1200+card+delete&ID=36932465&ehbid=36932465] No work Please helpme Thanks
dieber Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/24/2016 3:24 PM	Rate (0)
Bei Posts: 9 Rating: (0)	i have a question. if no have memory card . that mean password can't be reset. any solution choice for solve it. It need a password to access and it borrow from friend and he say no have mmc.
Bei Posts: 9 Rating: (0)	Last edited by: Bei at: 2/24/2016 3:27:05 PM
Suggestion To thank Quote Answer

2/24/2016 3:40 PM	Rate (0)
William_B Posts: 5225 Rating: (1165)	Bei i have a question. if no have memory card . that mean password can't be reset. any solution choice for solve it. It need a password to access and it borrow from friend and he say no have mmc. Take the PLC and go to your nearest Siemens office / representative. Ask respectfully for some help...
William_B Posts: 5225 Rating: (1165)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

11/16/2017 2:50 PM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 3/31/2023 Posts: 6704 Rating: (130)	New question published by mordab is split to a separate thread with the subject TIA portal v13 project for CPU 1214 - FC blocks are protected and don't have password. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on