Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

810g_R Param

Created by: List at: 1/17/2012 12:48 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/17/2012 12:48 PM	Rate (0)
List Posts: 664 Rating: (17)	Hai All In 810g CNC,for writingNC parameter,in 'NCD_SCHR' Block there are WER1,WER2,WER3 signals to configure. Actually what is the meaning and significance of this signal,is it error signal??. How will i configure configure and use it?? Is it mandatory to use it ?? Please reply, Rajeesh
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

1/17/2012 10:27 PM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (63)	Hi, Are you trying to write R parameters from the plc or within the part program ? Pee

Suggestion To thank Quote Answer

1/18/2012 9:53 AM	Rate (0)
List Posts: 664 Rating: (17)	Iwilling to read r prameter from NC toPLCand write r parametr from PLC
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

1/18/2012 10:46 PM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (63)	DTY describes the area to be read or written to and WER describe the number of the parameter to be read or written. eg DTY1 RP DTY2 NC WER1 1 WER2 75 RPNC is the command to look at the R parameters WER1 is for channel 1 WER2 is for R parameter number 75. The following link is for 810 plc programming. https://support.automation.siemens.com/WW/llisapi.dll/21906259?func=ll&objId=21906259&objAction=csView&nodeid0=32027210&ehbid=html%5F76%2Fehb%2F21906259%2Ehtm&nodeid=21904579&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=content&csQuery0=810&subtype=133300 Pee

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on