Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

analog input

Created by: automatizzando at: 6/10/2010 9:40 AM (5 Replies)

Rating (1)

Thanks 0

6 Entries

6/10/2010 9:40 AM	Rate (0)
automatizzando Bronze Member Joined: 3/11/2007 Last visit: 10/21/2024 Posts: 226 Rating: (13)	Withcommand as you read the analog input AI0 and AI1? Thanks
	Last edited by: automatizzando at: 6/10/2010 9:41 AM
Suggestion To thank Quote Answer

6/10/2010 10:07 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, Look at Pagaia'example - /tf/WW/en/Posts/31698#top Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

6/10/2010 10:36 AM	Rate (0)
automatizzando Bronze Member Joined: 3/11/2007 Last visit: 10/21/2024 Posts: 226 Rating: (13)	I'm sorry, I did not understand how to read analog inputs
	Last edited by: automatizzando at: 6/10/2010 10:45 AM Last edited by: automatizzando at: 6/10/2010 10:40 AM Last edited by: automatizzando at: 6/10/2010 10:38 AM
Suggestion To thank Quote Answer

6/10/2010 11:18 AM	Rate (1)
Aristotelis Posts: 147 Rating: (34)	Hi automatizzando Withcommand as you read the analog input AI0 and AI1? Thanks Reading analog input is not made using a command, rather accessing a memory area, such as [code]IW64/IW66[/code] I : stands for Input W: stands for Word. This depends on the configuration you did when commissioning the PLC. automatizzando I'm sorry, I did not understand how to read analog inputs What are the steps you're following and you are unable to read analog inputs? Best regards
Aristotelis Posts: 147 Rating: (34)
Suggestion To thank Quote Answer

6/10/2010 1:14 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, you can use the IW0, for example in any integer / word instruction that you use, as argument. for example, a move of IW0 to MW10.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/11/2010 8:38 AM	Rate (0)
automatizzando Bronze Member Joined: 3/11/2007 Last visit: 10/21/2024 Posts: 226 Rating: (13)	Thanks for your help

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on