Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AS-Wide Interconnection in SFC

Created by: GGábor at: 9/11/2012 7:53 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/11/2012 7:53 AM	Rate (0)
GGábor Posts: 21 Rating: (0)	Hi everybody, How can I makeAS-Wide Interconnection in SFC? Thanks a lot.
GGábor Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

9/12/2012 4:17 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Hi, dou you want to make a AS wide inetrconenction between SFC steps or transitions inside a SFC chart??? This won't be possible. AS wide interconnections are only possible in CFC charts.
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

9/12/2012 4:31 PM	Rate (0)
GGábor Posts: 21 Rating: (0)	I would like to start a motorand thencheck the feedbackfrom SFC. The sequence is in AS1 but the motor is controlled by AS2. So I would like to access the motor by SFC. What do you suggest?
GGábor Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

9/12/2012 4:56 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Use the SFC to set a bit. Grab this bit in a CFC chart and bring it to the other AS to start the motor. Do the same with the feedbacks from the motor. But note, that AS wide interconnections can not run in a very fast cycle. Keep this communication time in mind when you config the times in SFC.
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

9/13/2012 3:25 PM	Rate (0)
GGábor Posts: 21 Rating: (0)	Thanks for theadvice.
GGábor Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

9/21/2012 11:23 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	GGábor I would like to start a motorand thencheck the feedbackfrom SFC. The sequence is in AS1 but the motor is controlled by AS2. So I would like to access the motor by SFC. What do you suggest? You can use SFC Type.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on