Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can simulate a encoder input in PLCSIM??

Created by: Hauschild, Geison at: 2/9/2011 2:52 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/9/2011 2:52 AM	Rate (0)
Hauschild, Geison Posts: 3 Rating: (0)	Hello guys, I have a doubt ... Can simulate an encoderinput (1024 pulses, for sample) in PLCSIM?... PLCSIM version 5.4 SP4 Step 7 V 5.5
Hauschild, Geison Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

2/11/2011 11:23 AM	Rate (0)
Chilly_Garfield Posts: 316 Rating: (37)	Hi Geison, how do you mean it with simulate an encoder input? Do you want to simulate a SM338(POS-Input)? If this is the Situation, you can simulate the position in PLCSIM, e.g. with a interface. This is not possibil. A solution to simulate is: use a new variable to simulate the value you want to encode with an extra simulation programm.
Chilly_Garfield Posts: 316 Rating: (37)
Suggestion To thank Quote Answer

2/13/2011 10:46 PM	Rate (0)
Hauschild, Geison Posts: 3 Rating: (0)	Hi Chilly thanks for answering... I thought it ..... but I would like to simulate the interface as if it were a channel with the basic hardware of a CPU 313C, for example. And you've already done or seen someone do something like this? Thanks again for your attention...bye!!
Hauschild, Geison Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on