Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

COM PROFIBUS 3.3 Urgent !!

Created by: Patrikk at: 1/8/2010 12:30 PM (18 Replies)

Rating (7)

Thanks 4

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

1/8/2010 12:30 PM	Rate (0)
Patrikk Posts: 131 Rating: (0)	Dear all, could someone send me a link of comprofibus 3.3 so i can download it ? i need to open an old configuration so i can reconfigure it to comprofibus 5. plz help.
Patrikk Posts: 131 Rating: (0)	Last edited by: O_Moderator at: 5/30/2011 11:28 AM contact data deleted
Suggestion To thank Quote Answer

1/8/2010 2:19 PM	Rate (4)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello Patrik, Hope you will receive through email... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Aviator_747

1/8/2010 9:26 PM	Rate (0)
Patrikk Posts: 131 Rating: (0)	thank u mr. hristo. i sent u a message containing my email.
Patrikk Posts: 131 Rating: (0)
Suggestion To thank Quote Answer

1/9/2010 10:44 PM	Rate (0)
asaf Posts: 7 Rating: (0)	would appriciate if you can send it to me too.. (comprofibus)
asaf Posts: 7 Rating: (0)	Last edited by: O_Moderator at: 5/30/2011 11:29 AM contact data deleted Last edited by: asaf at: 1/9/2010 10:44 PM
Suggestion To thank Quote Answer

5/3/2010 11:47 AM	Rate (0)
Enia Experienced Member Joined: 9/12/2008 Last visit: 7/21/2023 Posts: 73 Rating: (0)	I'm also looking for Com profibus 3.3 for on my old PG740 (win 95) i only have com profibus 5.1 :( So i hope someone can send me a copy! thx
	Last edited by: O_Moderator at: 5/30/2011 11:29 AM contact data deleted
Suggestion To thank Quote Answer

8/31/2010 5:25 PM	Rate (0)
Timmy Posts: 41 Rating: (0)	I am also in need of the Com Profibus 3.3. IS there anyway someone could please send me the file as well? Gratitude. Timmy
Timmy Posts: 41 Rating: (0)	Last edited by: O_Moderator at: 5/30/2011 11:29 AM contact data deleted Last edited by: Timmy at: 8/31/2010 5:27 PM
Suggestion To thank Quote Answer

8/31/2010 5:50 PM	Rate (1)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Check it there. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Aviator_747

2/10/2011 7:53 PM	Rate (0)
DavidIpatek Posts: 3 Rating: (0)	Good day. Im requiring COM PROFIBUS v3.3 and COM ET200 too. I hope you can hlep me with this information please. in advance thank you!!
DavidIpatek Posts: 3 Rating: (0)	Last edited by: O_Moderator at: 5/30/2011 11:30 AM contact data deleted
Suggestion To thank Quote Answer

7/18/2011 5:28 AM	Rate (0)
Kom Posts: 1 Rating: (0)	Dear Sir Do you have Comprofibus 3.3 & ET200 I have problem when tried to import IM308C with Comprofibus 5.1 It response " Missing device master File: FE-03STD.200" I think I need Comprofibus 3.3 Please help me if you have it..
Kom Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/18/2011 7:36 AM	Rate (1)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Kom Dear Sir Do you have Comprofibus 3.3 & ET200 I have problem when tried to import IM308C with Comprofibus 5.1 It response " Missing device master File: FE-03STD.200" I think I need Comprofibus 3.3 Please help me if you have it.. Hello, Which GSD file are you trying? Check in manual - http://support.automation.siemens.com/WW/view/en/1498610(Chapter 9). Perhaps you really need version 3.3 (http://support.automation.siemens.com/WW/view/en/16892937) Best regards, Hristo MIhalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Aviator_747

|

Share this page:

Share this page on...

Follow us on