Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Complie Err

Created by: longtao at: 12/13/2022 4:38 PM (14 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

12/13/2022 4:38 PM	Rate (0)
longtao Member Joined: 4/23/2015 Last visit: 2/10/2023 Posts: 8 Rating: (0)	After copy the sdblocks to project , compile err. I have did the option - block type , update Import Libraries to V620. Attachment 2022-12-14_003310.png (42 Downloads)

Suggestion To thank Quote Answer

12/14/2022 6:57 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 3/20/2023 Posts: 2179 Rating: (272)	Hello. First you need to compile HW configuration, then CFC. What did you select in CFC-menu 'Options-Customize-Compile/Download' - 'System data from installation' or 'System data from project folder'?

Suggestion To thank Quote Answer

12/14/2022 7:27 AM	Rate (0)
longtao Member Joined: 4/23/2015 Last visit: 2/10/2023 Posts: 8 Rating: (0)	The setting follow the attachment. I guess maybe the SMATI5.msk err cause all the logs. Attachment 2022-12-14_152519.png (29 Downloads)

Suggestion To thank Quote Answer

12/14/2022 7:28 AM	Rate (0)
longtao Member Joined: 4/23/2015 Last visit: 2/10/2023 Posts: 8 Rating: (0)	KSN Hello. First you need to compile HW configuration, then CFC. What did you select in CFC-menu 'Options-Customize-Compile/Download' - 'System data from installation' or 'System data from project folder'? HW config compiling is passed.

Suggestion To thank Quote Answer

12/14/2022 7:41 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 3/20/2023 Posts: 2179 Rating: (272)	In first post you wrote that you copy sdblocks. From where did you copy it and to which folder? What versions of Step7, CFC, D7-SYS do you have installed?

Suggestion To thank Quote Answer

12/14/2022 7:59 AM	Rate (0)
longtao Member Joined: 4/23/2015 Last visit: 2/10/2023 Posts: 8 Rating: (0)	KSN In first post you wrote that you copy sdblocks. From where did you copy it and to which folder? What versions of Step7, CFC, D7-SYS do you have installed? FYI. The first time I install D7-SYS V7, but open project popup the info CFC create in V8.0 ，then I install CFC V8 & SFC V8, and compile err not gone ，so I install D7-SYS V8 . The pic "block type " is the result after I update all V618 to V620。 Attachment 2022-12-14_155329.png (44 Downloads)

Suggestion To thank Quote Answer

12/14/2022 8:18 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 3/20/2023 Posts: 2179 Rating: (272)	Did you copy sdblocks folder from/to somewhere? Do you have the archive of your project? Do you have sdblocks folder inside archive? What versions of libraries were in project before you have update them, V618?

Suggestion To thank Quote Answer

12/14/2022 9:32 AM	Rate (0)
longtao Member Joined: 4/23/2015 Last visit: 2/10/2023 Posts: 8 Rating: (0)	KSN Did you copy sdblocks folder from/to somewhere? Do you have the archive of your project? Do you have sdblocks folder inside archive? What versions of libraries were in project before you have update them, V618? The Customer give me an Archivezip created in "2012.11.17 "，the project folder have Global-sdblocks/sdlzs，then I copy to programfiles/siemens/s7cfc/ ，otherwise compile err will contain Library Files lost。

Suggestion To thank Quote Answer

12/14/2022 10:03 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 3/20/2023 Posts: 2179 Rating: (272)	Reinstall D7-SYS V8.0 on your PC. Retrive the project from archive again. Goto CFC-menu 'Options-Customize-Compile/Download', select 'System data from project folder' and don't update libraries on next step (there will be popup window with question about updating, press No), then try to compile.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users longtao

12/14/2022 10:11 AM	Rate (0)
longtao Member Joined: 4/23/2015 Last visit: 2/10/2023 Posts: 8 Rating: (0)	KSN Reinstall D7-SYS V8.0 on your PC. Retrive the project from archive again. Goto CFC-menu 'Options-Customize-Compile/Download', select 'System data from project folder' and don't update libraries on next step (there will be popup window with question about updating, press No), then try to compile. OK, I'll try it. Tks

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on