Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

connection between my laptop and CPU313C-2DP (MPI LINK-USB "TIA PORTAL")

Created by: sawkao at: 1/28/2013 7:02 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/28/2013 7:02 PM	Rate (0)
sawkao Posts: 6 Rating: (1)	Hello! I can't establish connection between my laptop and CPU313C-2DP. My laptop has STEP7 v5.5 (TIA Portal UPD5) under windows 7. I use adapter for MPI LINK-USB (it's not siemens device) and when i connect adapter to usb in TIA PORTAL "online access" i see new connection "com <15> [RS232/PPI multi-master cable]" but i can't establish connection to controller with this connection. In STEP 7 (not TIA) i use PG/PC interface and adapter works good! Program was written in TIA PORTAL and i can't use STEP 7 (without tia portal) because migration works in one direction Please help! Attachment connection problem.jpg (144 Downloads)
sawkao Posts: 6 Rating: (1)
Suggestion To thank

1/28/2013 7:15 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already published in the following threadconnection between my laptop and CPU313C-2DP (MPI LINK-USB in TIA PORTAL). Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on